NOTICE: Due to a lapse in annual appropriations, most of this website is not being updated. Learn more.

Form submissions will still be accepted but will not receive responses at this time. Sections of this site for programs using non-appropriated funds (such as NVLAP) or those that are excepted from the shutdown (such as CHIPS and NVD) will continue to be updated.

U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

PUBLICATIONS

The Influence of Clay and Elastomer Concentration on the Morphology and Fracture Energy in Preformed Acrylic Rubber Dispersed Clay Filled Epoxy Nanocomposites

Published

Author(s)

G Balakrishnan, P R. Start, D T. Raghavan, Steven Hudson, D Yebassa

Abstract

The influence of toughener and clay concentration on the morphology and mechanical properties of three-phase, rubber-modified epoxy nanocomposites was studied. Nanocomposite samples were prepared by adding octadecyl ammonium ion exchanged clay to a dispersion of pre-formed acrylic rubber particles in liquid epoxy, so as to minimize alteration to the rubber morphology in the final cured specimen. The state of clay platelet exfoliation and rubber dispersion in the cured nanocomposites was studied using TEM. The amounts of clay platelet separation and dispersion of clay aggregates in the epoxy matrix were found to be sensitive to clay and toughener concentration. Tensile modulus and strength increase and ductility decreases with increasing organoclay content, while rubber has the opposite effects on the properties of epoxy resin. When both additives are present in epoxy resin, a favorable combination is produced: ductility is enhanced without compromising modulus and strength. The glass transition temperature of epoxy resin remains relatively unchanged with clay addition.
Citation
Plasma Processes and Polymers
Volume
46
Pub Type
Journals

Download Paper

Local Download

Keywords

clay, epoxy, fracture energy, morphology, nanocomposite, preformed acrylic, rubber

Citation

Balakrishnan, G. , Start, P. , Raghavan, D. , Hudson, S. and Yebassa, D. (2005), The Influence of Clay and Elastomer Concentration on the Morphology and Fracture Energy in Preformed Acrylic Rubber Dispersed Clay Filled Epoxy Nanocomposites, Plasma Processes and Polymers, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=852538 (Accessed October 7, 2025)

Issues

If you have any questions about this publication or are having problems accessing it, please contact [email protected].

Created October 31, 2005, Updated October 12, 2021
Was this page helpful?