Emmerich, S.
, McDowell, T.
and Anis, W.
(2007),
Simulation of the Impact of Commercial Building Envelope Airtightness on Building Energy Utilization, ASHRAE Transactions
(Accessed December 19, 2025)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Simulation of the Impact of Commercial Building Envelope Airtightness on Building Energy Utilization
Published
Author(s)
, Timothy P. McDowell, Wagdy Anis
Abstract
This paper presents a simulation study of the energy impact and cost-effectiveness of improving envelope airtightness in low-rise US commercial buildings. Despite common assumptions, measurements have shown that typical US commercial buildings are not particularly airtight. Past simulation studies have shown that commercial building envelope leakage can result in significant heating and cooling loads. To evaluate the potential energy savings and cost-effectiveness of an air barrier, annual energy simulations and cost estimates were prepared for two nonresidential buildings (a two-story office building and, a one-story retail building) in five US cities. A coupled multizone airflow and building energy simulation tool was used to predict the energy use for the buildings at a target tightness level relative to a baseline level based on measurements in existing buildings. Predicted potential heating and cooling annual energy usage and cost savings ranged from 9% to 36% with the smallest savings occurring in the cooling-dominated climates of Phoenix and Miami.Citation
ASHRAE Transactions
Volume
113
Pub Type
Journals
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact [email protected].
Created December 14, 2007, Updated February 19, 2017