Skip to main content

NOTICE: Due to a lapse in annual appropriations, most of this website is not being updated. Learn more.

Form submissions will still be accepted but will not receive responses at this time. Sections of this site for programs using non-appropriated funds (such as NVLAP) or those that are excepted from the shutdown (such as CHIPS and NVD) will continue to be updated.

U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Inkjet Metrology II: Resolved Effects of Ejection Frequency, Fluidic Pressure and Droplet Number on Reproducible Drop-on-Demand Dispensing

Published

Author(s)

R M. Verkouteren, Jennifer R. Verkouteren

Abstract

We report highly reproducible gravimetric and optical measurements of microdroplets enabled by fluidic pressure feedback control and state-of-the-art measurement systems that lend new insights into the process of drop-on-demand (DOD) printing. Baseline fluidic pressure within the DOD dispenser was controlled to within 0.02 hPa, enabling long-term stability in dispensed droplet mass with observed variations between 0.6 % and 1.6 % (RSD) for isobutanol. With mass, the high precision of velocity measurement enabled consistent determination of droplet kinetic energy, which governed baseline behavior. Mass and velocity were influenced in a non-linear manner by the frequency of droplet ejection, the fluidic pressure applied, and the number of droplets dispensed. Non-linear mass effects were attributable to acoustic resonances, energy partitioning, and pressure wavelets created during “first-drop” formation, although mechanistic clarity is far from complete.
Citation
Langmuir

Keywords

droplet, drop-on-demand, first-drop, fluidic pressure, gravitmetry, inkjet, microbalance, piez

Citation

Verkouteren, R. and Verkouteren, J. (2011), Inkjet Metrology II: Resolved Effects of Ejection Frequency, Fluidic Pressure and Droplet Number on Reproducible Drop-on-Demand Dispensing, Langmuir, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=908095 (Accessed October 8, 2025)

Issues

If you have any questions about this publication or are having problems accessing it, please contact [email protected].

Created June 13, 2011, Updated February 19, 2017
Was this page helpful?