Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Improved Nozzle Manifold for Gas Flow Calibrations

Published

Author(s)

Aaron N. Johnson, Chunhui Li, John D. Wright, Gina M. Kline, Christopher J. Crowley

Abstract

We developed a new nozzle manifold that reduced the uncertainty of flow calibrations from 0.09 % to as low as 0.074 % for flows of air up to 0.84 kg/s (43 000 L/min at reference conditions of 101.325 kPa and 293.15 K). The nozzle manifold also reduces the time required to complete calibrations by a factor of 10. Twenty-one critical flow venturis (CFVs) are installed in the manifold each with a nominal throat diameter of 0.5207 cm (0.205 inch). All of the 21 CFVs are individually calibrated in dry air using NIST’s recently improved 677 L PVTt standard. The CFV working standards are used in parallel to calibrate customer flow meters at flows up to 21 times the flow of a single CFV. We demonstrate that interference effects between the CFVs in the manifold are negligible and we provide an uncertainty analysis of the CFV array working standard. We used the CFV array as a transfer standard to demonstrate the metrological equivalence of NIST’s 677 L and 26 m3 PVTt standards.
Proceedings Title
8th International Symposium on Fluid Flow Measurement
Conference Dates
June 18-22, 2012
Conference Location
Colorado Springs, CO

Keywords

critical flow venturi, gas flow, manifold, nozzle, working standard, uncertainty

Citation

Johnson, A. , Li, C. , Wright, J. , Kline, G. and Crowley, C. (2012), Improved Nozzle Manifold for Gas Flow Calibrations, 8th International Symposium on Fluid Flow Measurement , Colorado Springs, CO, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=911475 (Accessed March 19, 2024)
Created June 20, 2012, Updated February 19, 2017