Microwave generation with low residual phase noise from a femtosecond fiber laser with an intracavity electro-optic modulator

Published

November 14, 2011

Author(s)

William C. Swann, Esther Baumann, Fabrizio R. Giorgetta, Nathan R. Newbury

Abstract

Low phase-noise microwave generation has previously been demonstrated using self-referenced frequency combs to divide down a low noise optical reference. We demonstrate an approach based on a fs Er-fiber laser that avoids the complexity of self-referenced stabilization of the offset frequency. Instead, the repetition rate of the femtosecond Er-fiber laser is phase locked to two cavity-stabilized cw fiber lasers that span 3.74 THz by use of an intracavity electro-optic modulator with over 2 MHz feedback bandwidth. The fs fiber laser effectively divides the 3.74 THz difference signal to produce microwave signals at harmonics of the repetition rate. Through comparison of two identical dividers, we measure a residual phase noise on a 1.5 GHz carrier of -120 dBc/Hz at 1 Hz offset.

Proceedings Title

Conference on Lasers and Electro-Optics (CLEO)

Volume

19

Issue

24

Conference Dates

May 1-6, 2011

Conference Location

Baltimore , MD

Pub Type

Conferences

Download Paper

https://doi.org/10.1364/OE.19.024387

Keywords

frequency combs, microwaves

Citation

Swann, W. , Baumann, E. , Giorgetta, F. and Newbury, N. (2011), Microwave generation with low residual phase noise from a femtosecond fiber laser with an intracavity electro-optic modulator, Conference on Lasers and Electro-Optics (CLEO), Baltimore , MD, [online], https://doi.org/10.1364/OE.19.024387 (Accessed October 26, 2025)