Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Diffusion-controlled reference material for VOC emissions testing: The effect of temperature and humidity.

Published

Author(s)

John Little, Liu Zhe, Cynthia H. Reed, Steven Cox

Abstract

To improve the reliability and accuracy of chamber tests for measuring emissions of volatile organic compounds (VOCs) from interior building products, the National Institute of Standards and Technology (NIST) and Virginia Tech (VT) have created a prototype reference material by loading toluene into a polymethylpentene (PMP) film (Cox et al. 2010). The characteristic emission parameters of the reference material, including toluene concentration in pre-loaded films (C0), material-phase diffusion coefficient (D), and material/air partition coefficient (K), have been measured at 23 ºC and 0 % relative humidity (RH). A fundamental mass-transfer model is then used to predict the true toluene emission rate from the reference material at 23 ºC, which serves as the reference value for validating the results measured by different laboratories and evaluating test performance. The feasibility of the reference material and its usefulness has been demonstrated in several inter-laboratories studies (Howard-Reed et al. 2011). In the present work, the temperature and humidity dependence of the emission parameters are determined and the model is further validated for a range of temperature and humidity levels. The reference material can therefore be applied with confidence over a wider range of emission chamber testing conditions.
Conference Dates
July 8-12, 2012
Conference Location
Brisbane, AU
Conference Title
Healthy Buildings 2012 Conference

Keywords

VOCs emissions testing, VOCs emission model, standard source, temperature, humidity

Citation

Little, J. , Zhe, L. , Reed, C. and Cox, S. (2013), Diffusion-controlled reference material for VOC emissions testing: The effect of temperature and humidity., Healthy Buildings 2012 Conference, Brisbane, AU, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=910536 (Accessed March 29, 2024)
Created January 31, 2013, Updated October 12, 2021