Skip to main content

NOTICE: Due to a lapse in annual appropriations, most of this website is not being updated. Learn more.

Form submissions will still be accepted but will not receive responses at this time. Sections of this site for programs using non-appropriated funds (such as NVLAP) or those that are excepted from the shutdown (such as CHIPS and NVD) will continue to be updated.

U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

PM Noise Measurement at W-Band

Published

Author(s)

Archita Hati, Craig W. Nelson, David A. Howe

Abstract

We present improved performance for a 92 - 96 GHz cross-spectrum phase modulated (PM) noise measurement system previously reported. The system is principally designed to measure amplifiers in pulsed mode with a duty cycle of 10% to 100% (CW) at a given pulse repetition frequency. This paper reports only the CW mode of operation. Data for the noise-floor of the measurement system as well as PM noise of several W- band active components are presented. This work also discusses an improved performance frequency synthesizer that operates in the 92 - 96 GHz range.
Citation
IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control
Volume
61

Keywords

Cross-spectrum, Frequency synthesis, Oscillator, Phase noise, W-band

Citation

Hati, A. , Nelson, C. and Howe, D. (2014), PM Noise Measurement at W-Band, IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control (Accessed October 4, 2025)

Issues

If you have any questions about this publication or are having problems accessing it, please contact [email protected].

Created December 12, 2014, Updated February 19, 2017
Was this page helpful?