Picosecond Josephson samplers: Modeling and measurements

Published

June 4, 2025

Author(s)

Logan Howe, Bart van Zeghbroeck, David Olaya, John Biesecker, Charles Burroughs, Peter Hopkins, Samuel Benz

Abstract

Measurement of signals generated by superconducting Josephson junction (JJ) circuits require ultra-fast components located in close proximity to the generating circuitry. We report a detailed study of optimal design criteria for a JJ-based sampler that balances the highest sampler bandwidth (shortest 10%–90% rise time) with minimal sampled waveform distortion. We explore the impacts on the performance of a sampler, realized using a single underdamped JJ as the logical sampling element (the comparator), due to the type of signal-comparator coupling scheme that is utilized (galvanic, inductive, or capacitive). In these simulations, we emulate the entire waveform reconstruction sampling process, via comparator threshold detection, while sweeping the time location at which the waveform is being sampled. We extract the sampled waveform rise time [or full width at half maximum FWHM)] as a function of the comparator's Stewart–McCumber parameter and as a function of the coupling strength between the device under test and comparator. Based on our simulation results, we design, fabricate, and characterize a cryocooled (3.6 K operating temperature) JJ sampler utilizing the NIST state-of-the-art Nb/amorphous-Si/Nb junctions. We separately sample a step signal and an impulse generator co-located on-chip with the comparator and sampling strobe generator by implementing the same binary search comparator threshold detection technique during sampler operation as is used in simulation. With this technique, the system is fully digital and automated, and the operation of the fabricated device directly mirrors simulation. Our sampler technology shows a 10%–90% rise time of 3.3 ps and the capability to measure transient pulse widths of 2.5 ps FWHM. A linear system analysis of sampled waveforms indicates a 3 dB bandwidth of 225 GHz, but we demonstrate effective measurement of signals well above this—as high as 600 GHz.

Citation

Review of Scientific Instruments

Pub Type

Journals

Download Paper

https://doi.org/10.1063/5.0255228

Local Download

Keywords

sampler, waveform sampling, Josephson junction, superconductive electronics, single flux quantum

Citation

Howe, L. , VAN ZEGHBROECK, B. , Olaya, D. , Biesecker, J. , Burroughs, C. , Hopkins, P. and Benz, S. (2025), Picosecond Josephson samplers: Modeling and measurements, Review of Scientific Instruments, [online], https://doi.org/10.1063/5.0255228, https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=959091 (Accessed June 30, 2025)