Heigel, J.
(2023),
Thermography of Single Line Scans Performed on the Commercial Powder Bed Fusion Machine for the Additive Manufacturing Benchmark Test Series (AM-Bench 2018), Advanced Manufacturing Series (NIST AMS), National Institute of Standards and Technology, Gaithersburg, MD, [online], https://doi.org/10.6028/NIST.AMS.100-53, https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=926135
(Accessed November 12, 2025)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Thermography of Single Line Scans Performed on the Commercial Powder Bed Fusion Machine for the Additive Manufacturing Benchmark Test Series (AM-Bench 2018)
Published
Author(s)
Abstract
This document provides details on the files available in the dataset "In situ thermographic measurements of single line scans performed for the Additive Manufacturing Benchmark Test Series (AM-Bench 2018)." These measurements are performed as part of the Additive Manufacturing Benchmark Test Series (AMBench) supporting the melt pool geometry (length) and cooling rate challenges (CHAL-AMB2018-02-MP-Length and CHAL-AMB2018-02-CR). The following sections provided details on the experiments and data files.Citation
Advanced Manufacturing Series (NIST AMS) - 100-53
Report Number
100-53
NIST Pub Series
Pub Type
NIST Pubs
Download Paper
Keywords
Additive Manufacturing, Thermography, Melt pool length, Cooling rate, AM Bench, Benchmark data, Dataset
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact [email protected].
Created June 27, 2023, Updated September 29, 2025