McCaughan, A.
, Nam, S.
, Gammell, J.
and Oh, D.
(2020),
A low-cost, high-density,customizable microwave vacuum feedthrough for cryogenic applications, Review of Scientific Instruments
(Accessed June 22, 2025)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
A low-cost, high-density,customizable microwave vacuum feedthrough for cryogenic applications
Published
Author(s)
, , Jimmy Gammell, Dylan M. Oh
Abstract
We have designed, constructed, and tested an electrical vacuum feedthrough that can carry a large number of microwave signal lines, has high vacuum compatibility, and is highly customizable. We found that it had a leak rate of approximately 10^(-7) Pa*L/s (7.5x10^(-9) torr*L/s), making it suitable for high-vacuum systems such as cryostats. The feedthrough is low-cost, and the PCB-based design allows the choice of any surface-mountable microwave connector. We additionally verified operation through consistent use on a real cryogenic system and verified the mechanical robustness of the feedthrough.Citation
Review of Scientific Instruments
Pub Type
Journals
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact [email protected].
Created January 1, 2020, Updated June 16, 2023