Lass, E.
, Stoudt, M.
, Williams, M.
and Katz, M.
(2018),
Precipitation and dissolution of delta and gamma-double-prime during heat treatment of a laser powder-bed fusion produced Ni-based superalloy, Scripta Materialia, [online], https://doi.org/10.1016/j.scriptamat.2018.05.025
(Accessed October 9, 2025)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Precipitation and dissolution of delta and gamma-double-prime during heat treatment of a laser powder-bed fusion produced Ni-based superalloy
Published
Author(s)
, , ,
Abstract
One drawback of the laser powder-bed fusion additive manufacturing (AM) technique is the build-up of residual stresses during processing that require a stress-relief heat treatment prior to components being removed from the build plate. Here, we demonstrate the coprecipitation of the gamma-double-prime-phase alongside the known delta-phase, during stress-relief annealing of AM Inconel 625 at 870 °C. The unexpected precipitation of gamma-double-prime in the AM material is attributed to the local solute enrichment to the interdendritic regions of the as-built solidification microstructure. Dissolution of the delta and gamma-double-prime phases is achieved after annealing for 15 min at 1150 °C.Citation
Scripta Materialia
Volume
154
Pub Type
Journals
Download Paper
Keywords
Additive manufacturing, Ni-based alloys, Inconel 625
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact [email protected].
Created June 8, 2018, Updated November 10, 2018