NOTICE: Due to a lapse in annual appropriations, most of this website is not being updated. Learn more.

Form submissions will still be accepted but will not receive responses at this time. Sections of this site for programs using non-appropriated funds (such as NVLAP) or those that are excepted from the shutdown (such as CHIPS and NVD) will continue to be updated.

U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

TOOLS & INSTRUMENTS

Ismatec MCP-Z Gear Pump

Please refer to the owner's manual for further information.

Specifications/Capabilities

  • Duty cycle continuous from 60 to 6000 rpm
  • Max rpm 60 to 6000
  • Motor type 24 VDC, PMDC
  • Motor 0.15 kW (1/5 hp)
  • Max flow rate with indicated pump head Pump head 07002-25 1.02 to 102 mL/min
  • Pump head 07002-26 2.52 to 252 mL-min-1
  • Pump head 07002-27 5.04 to 504 mL-min-1
  • Pump head 07002-14 5.52 to 552 mL-min-1
  • Pump head 07002-17 19.2 to 1920 mL-min-1
  • Pump head 07003-02 34.8 to 3480 mL-min-1
  • Pump head 07002-23 38.4 to 3840 mL-min-1
  • Pump head 07001-80 38.4 to 3840 mL-min-1
  • Pump head 07001-70 38.4 to 3840 mL-min-1
  • Pump head 07001-40 54.6 to 5460 mL-min-1
  • Pump head 07003-04 70.2 to 702 mL-min-1
  • Temp range 40°C (104°F)
  • Remote control Input speed control:0-5 or 0-10 VDC, 0-20 or 4-20 mA (DB15 female)
  • On/off control: TTL contact (DB15 female) RS-232: 9600 or 1200 baud, 8 bit, 1 stopbit, no parity (DB9 female)
  • Output 2 valve control outputs (DB15 female), additional RS-232 output for cascading (DB9 female)
  • Power VAC 115/230
  • Hz 50/60
  • Dimensions 15.2 cm L x 26.04 cm H x 24.13 cm W (6" x 101/4" x 91/2")
Created May 18, 2011, Updated February 24, 2020
Was this page helpful?