An official website of the United States government
Here’s how you know
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Dale P. Bentz, Casimir Bognacki, Kyle Riding, Victor Villarreal
In the past 50 years, portland cements have become progressively finer, in order to meet increasing demands for fast-track construction, etc. While finer cements produce higher early-age strengths, they also increase early-age heat release which can
Dale P. Bentz, Max A. Peltz, Alejandro Duran-Herrera, P Valdez, Cesar Juarez
As sustainability moves to the forefront of construction, the utilization of high volume fly ash concrete mixtures to reduce CO2 emissions and cement consumption per unit volume of concrete placed is receiving renewed interest. Concrete mixtures in which
Alejandro Duran-Herrera, Cesar Juarez, P Valdez, Dale P. Bentz
This article presents results of an experimental research work oriented to develop practical tools for the regional concrete industry, as well as to illustrate the potential benefits of the synergistic effect of an ASTM C 618 Class F fly ash (FA) produced
The transformation of chemical analyses to phase estimates via the Bogue calculations has been successfully used by industry for the past 70 years. Since its inception, however, it has been recognized as an estimate of potential phase composition based
The use of cementitious materials has been proposed in a variety of waste management systems because these materials can have a variety of desirable performance characteristics: hydraulic isolation, chemical isolation, structural stability. Cementitious
While high volume fly ash (HVFA) concrete mixtures are attractive from a sustainability viewpoint, they are sometimes plagued by long delays in finishing, producing a performance that is unacceptable to contractors. In this paper, isothermal calorimetry
This document serves as the users guide for the educational version of the Virtual Cement and Concrete Testing Laboratory (VCCTL) software, version 2.0. Using the VCCTL, a user may create 3D microstructures of cement paste with clinker, calcium sulfate
The research presented here is the first report of fabricating mulitwalled carbon nanotube (MWCNT) based thin coatings on polyurethane foam (PUF) using Layer-by-Layer assembly, and using MWCNTs to reduce the flammability of PUF. The (440.6 ± 47.1) nm thick
The heat of hydration of hydraulic cements results from the complex sets of phase dissolution and precipitation activity accompanying the addition of water to a cement. Heat of hydration is currently measured in one of two ways: 1) through an acid
Christopher C. White, Donald L. Hunston, Sam Williams
A novel sealant-testing device was used to continuously monitor the mechanical properties of a one part silicone sealant for movement cycles initiated from 10 h to 168 h after sample creation. These cure times fall between the proposed RILEM TC 139
A novel sealant-testing device was used to continuously monitor the mechanical properties of a one part silicone sealant for movement cycles initiated from 10 h to 168 h after sample creation. These cure times fall between the proposed RILEM TC139
John Schlitter, Andrew Senter, Dale P. Bentz, Tommy Nantung, Jason Weiss
The standard restrained ring test (ASTM 1581-04) is a simple, economical method to evaluate a concrete mixture s susceptibility of shrinkage cracking. Unfortunately, the test only provides restraint against samples that shrink and can not be used to
Javier Castro, Ryan Henkensiefken, Tommy Nantung, Dale P. Bentz, Jason Weiss
The increased propensity for shrinkage cracking in low water-to-cement ratio (w/c) concrete has resulted in the development of new methods that can reduce the risk of early-age cracking, including internal curing. Internal curing can use water-filled