Driver, R.
and Schmidt, J.
(2000),
NCSL Pressure Comparison At 0.69 Mpa (100 psi) and 1.4 Mpa (200 psi), National Conference of Standards Laboratories International
(Accessed May 21, 2025)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
NCSL Pressure Comparison At 0.69 Mpa (100 psi) and 1.4 Mpa (200 psi)
Published
Author(s)
,
Abstract
The pressure and Vacuum Group at NIST has piloted a pressure comparison under the auspices of the Measurement comparison program committee for the NCSL. A 1.4 MPa (~200 psi)transducer package used as a transfer standard was circulated among 20 domestic calibration laboratories (private and public). The participants were asked to provide two gage pressure readings (in addition to zero) on two transducers for the comparison. After transducer drift is removed, the results are compared and expressed as deviations from the NIST results. Several participating laboratories, values differed from the NIST values by more than 300 ppm.Citation
National Conference of Standards Laboratories International
Pub Type
Journals
Keywords
comparison, gage mode, NCSL, pressure, round robin
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact [email protected].
Created July 1, 2000, Updated February 17, 2017