Effects of Water, Salt Solution and Simulated Concrete Pore Solution on the Properties of Composite Matrix Resins Used in Civil Engineering Applications

Published

April 1, 2001

Author(s)

Joannie W. Chin, K Aouadi, M R. Haight, W Hughes, Tinh Nguyen

Abstract

One of the obstacles hindering the acceptance of polymer composites in civil engineering applications is the susceptibility of the polymeric matrix to degradation that is initiated by moisture, temperature, and corrosive chemical environments. The objective of this study was to characterize chemical and physical changes in polymer matrix resins following exposure to these environments. Resin systems studied were vinyl ester and isophthalic polyester, both of which are proposed for use in construction applications. Unreinforced free films were exposed to water, alkaline and saline environments at ambient and elevated temperatures for extended periods of time. Changes in strength and thermophysical properties were evaluated through tensile testing, dynamic mechanical thermal analysis (DMTA) and thermogravimetric analysis (TGA). Chemical degradation of the polymers was characterized using Fourier transform infrared (FTIR) spectroscopy. Energy dispersive x-ray (EDX) analysis of specimens following exposure was carried out to determine if ion diffusion into the bulk polymer occurred. Only minor changes in the glass transition temperatures of the polymers were observed after prolonged exposure at elevated temperature, but more substantial changes were noted in tensile strength, particularly in the case of the isophthalic polyester. Examination of the polymers following immersion in salt solution and alkaline solution showed essentially no ionic penetration into the bulk, with the exception of specimens that were visibly degraded. Spectroscopic analysis of chemical structure prior to and following exposure revealed varying degrees of ester hydrolysis.

Citation

Polymer Composites

Volume

22

Issue

No. 22

Pub Type

Journals

Download Paper

Local Download

Keywords

building technology, civil infrastructure, concrete pore solution, isophthalic polyester, polymer composites, salt solution, vinyl ester, water

Citation

Chin, J. , Aouadi, K. , Haight, M. , Hughes, W. and Nguyen, T. (2001), Effects of Water, Salt Solution and Simulated Concrete Pore Solution on the Properties of Composite Matrix Resins Used in Civil Engineering Applications, Polymer Composites, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=860212 (Accessed December 14, 2024)