Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Atomic layer deposition of Al2O3 to Ti-6Al-4V feedstock improves oxidation resistance and tensile strength in additively manufactured parts

Published

Author(s)

Nicholas Derimow, Joseph Gauspohl, Alec Saville, Jake Benzing, Elisabeth Mansfield, Christopher Gump, Nikolas Hrabe

Abstract

With the ever-increasing research and development into additive manufacturing (AM) via laser powder bed fusion (PBF-L) of Ti-6Al-4V alloy, there has been numerous efforts to introduce different coatings onto the metal powder feedstock in order to achieve benefits to the PBF-L process. Whether in the form of dispersion strengthening, enhanced flowability, or grain refinement, there are several dry coating techniques that can be used to introduce a coating media onto the metal powder feedstocks. In the present investigation, we leverage atomic layer deposition (ALD), a thin-film coating technique, to uniformly coat a continuous layer of Al2O3 onto a batch Grade 23 Ti-6Al-4V feedstock. This ALD-coated feedstock was then used in PBF-L to construct specimens for analysis of the microstructure and mechanical properties in the as-built and hot isostatic pressure (HIP) treated state. The ALD-coated feedstock displayed greater Hall flowability and oxidation resistance when measured via thermogravimetric analysis in air, with no significant changes to microstructure or bulk morphological features. The microstructure of the as-built and HIPed material stemming from the ALD-coated powder batch was indistinguishable from the material made from virgin powder feedstock, indicating that the ALD Al2O3 layer dissolved into the melt pool and went into solution. The ALD condition had an approximate 80 MPa increase in tensile strength in the as-built condition, and approximate 70 MPa increase in strength in the HIPed condition due to solid solution strengthening from the increased oxygen content. The ALD HIPed condition, while somewhat lower in elongation and reduction of area relative to the virgin material after HIP, remained within common material specification requirements for PBF Ti-6Al-4V. While there was an increase in alloy chemistry after the ALD process, this work serves as a proof-of-concept for pre-treating Ti-6Al-4V feedstocks with ALD methodology to achieve benefits to flowability, oxidation resistance, and solid solution strengthening.
Citation
Additive Manufacturing

Keywords

Additive manufacturing, Ti-6Al-4V, Atomic layer deposition, Mechanical Properties, Surface treatment

Citation

Derimow, N. , Gauspohl, J. , Saville, A. , Benzing, J. , Mansfield, E. , Gump, C. and Hrabe, N. (2025), Atomic layer deposition of Al2O3 to Ti-6Al-4V feedstock improves oxidation resistance and tensile strength in additively manufactured parts, Additive Manufacturing, [online], https://doi.org/10.1016/j.surfcoat.2025.132179, https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=958503 (Accessed May 7, 2025)

Issues

If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.

Created April 30, 2025, Updated May 5, 2025