Synowczynski, J.
, Dewing, G.
, Geyer, R.
and Grosvenor Jr, J.
(2000),
Acceptor Doping of Barium Strontium Titanate and Magnesium Oxide Composites, Ceramic Transactions
(Accessed October 10, 2024)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Acceptor Doping of Barium Strontium Titanate and Magnesium Oxide Composites
Published
Author(s)
J. Synowczynski, G. Dewing, ,
Abstract
The microwave dielectric properties of bulk barium strontium titanate and magnesium oxide ceramic composites are measured with cylindrical mode-filtered cavity and dielectric sleeve resonator techniques. The cylindrical wall of the mode- filtered cavity consists of wire wound belical waveguide, which permits the use of high-purity TFo1n resonant modes for high accuracy permittivity measurements. Employing low loss dielectric sleeve resonators allows dielectric characterization of rod specimens at frequencies nominally determined by the permittivity and aspect ratio of the sleeve resonator. Both temperature and frequency dispersion are examined for differing stoichiometric percentages of barium to strontium and for various weight percentages of added magnesium oxide.Citation
Ceramic Transactions
Volume
106
Pub Type
Journals
Keywords
barium strontium titanate, dielectric properties magnesium doping, microwave, permittivity, tunability
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created December 31, 1999, Updated October 12, 2021