Skip to main content

NOTICE: Due to a lapse in annual appropriations, most of this website is not being updated. Learn more.

Form submissions will still be accepted but will not receive responses at this time. Sections of this site for programs using non-appropriated funds (such as NVLAP) or those that are excepted from the shutdown (such as CHIPS and NVD) will continue to be updated.

U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Rainin Dynamax RP-1 Peristaltic Pump

Rainin Dynamax RP-1 Peristaltic Pump

Rainin Dynamax RP-1 Peristaltic Pump

Specifications/Capabilities

  • Head speed: 0 to 48 rpm
  • Torque: greater than 3 N-m across full operating range at 115VAC
  • Speed Stability: 0.5%
  • Speed adjustment: 0.00 to 9.99 rpm in 0.01 rpm increments
           10.0 to 48.0 rpm in 0.1 rpm increments
  • Flow rate: 0-37 ml/min max at 0 backpressure (depending on tubing diameter)
  • Max back-pressure: 0.48 GPa (70 psi)
  • WEtted surfaces: PVC, Silicon, Viton (tubing only)
  • Flow tubing diameter: 0.25mm ID- 4 mm ID
  • Temperature: 4°C to 40°C
  • Humidity: up to 95% non-condensing
  • Operating position: vertical ±5°

Please refer to the owner's manual for further information.

Created May 18, 2011, Updated February 24, 2020
Was this page helpful?