This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 29 CFR 1926.6(h)(2) | ANSI A10.4 | 1963 | Safety Requirements for Workmen's Hoists | American National Standards Institute | |
Mine Safety and Health Administration | 30 CFR 77.1304(a) | DOI/BOM Information Circular 8179 | 1963 | Safety Recommendations for Sensitized Ammonium Nitrate Blasting Agents | Bureau of Mines, U.S. Department of Interior | |
National Highway Traffic Safety Administration | 49 CFR 571.104 S3 Daylight opening | SAE Publication | 1963 | SAE Aerospace-Automotive Drawing Standards, Ground Vehicle Practice | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (1) | SAE J-602 | 1963 | Headlamp Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.593(b)(2) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Coast Guard | 46 CFR 160.062-3(a) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.252(d)(1)(vi) | API 2201 | 1963 | Welding or Hot Tapping on Equipment Containing Flammables | American Petroleum Institute | |
Public Health Service | 42 CFR 84.41(b) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.252(d)(1)(vii) | ANSI Z54.1 | 1963 | Safety Standard for Non-Medical X-ray and Sealed Gamma Ray Sources | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1910.101(c) | CGA S-1.2 | 1963 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 60.593a(b)(2) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-2 | 1963 | Specification for L-810 Obstruction Light | Federal Aviation Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 160.062-4(d)(1) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.252(d)(2)(ii) | ANSI Z54.1 | 1963 | Safety Standard for Non-Medical X-ray and Sealed Gamma Ray Sources | American National Standards Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.202 S5.1(a)(4) | SAE Publication | 1963 | SAE Aerospace-Automotive Drawing Standards | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.101(c) | CGA S-1.1 | 1963 | Safety Release Device Standard--Cylinders for Compressed Gases | Compressed Gas Association | |
Labor Department | 41 CFR 50-204.71 | CGA S-1.2 | 1963 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 60.632(f) | ASTM E 169 | 1963 | Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis | ASTM International | |
Public Health Service | 42 CFR 84.41(h) | MIL-STD-105D | 1963 | Sampling Procedures and Tables for Inspection by Attributes | U.S. Department of Defense | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-2 | 1963 | Specification for L-810 Obstruction Light | Federal Aviation Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(15) | SAE J-602 | 1963 | Headlamp Aiming Device for Mechanically Aimable Sealed Beam Headlamp Units | Society of Automotive Engineers | |
Occupational Safety and Health Administration | 29 CFR 1910.6(h)(8) | ASTM B 117 | 1964 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.109, Table H-22, Footnote 3 | NFPI Publication | 1964 | Definition and Test Procedures for Ammonium Nitrate Fertilizer | National Food Plant Institute | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S14.2.1.6.2 | SAE J-567b | 1964 | Bulb Sockets | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S5.2 (6) | SAE J-567b | 1964 | Bulb Sockets | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60.45(f)(5)(i) | ASTM D 1945 | 1964 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 60.106(j)(2) | ASTM D 129 | 1964 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.105 | CGA G-8.1 | 1964 | Standard for Installation of Nitrous Oxide Systems at Consumer Sites | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 761.71(b)(2)(vi) | ASTM D 129 | 1964 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.103 S4.2 | SAE J-902 | 1964 | Recommended Practice for Passenger Car Windshield Defrosting Systems | Society of Automotive Engineers | |
Geological Survey | 30 CFR 402.13(b) | OMB Circular A-67 | 1964 | Coordination of Federal Activities in the Acquisition of Certain Water Data | U.S. Office of Management and Budget | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5345-21 | 1964 | Specification for L-813 Static Indoor Type Constant Current Regulator Assembly; 4 KW and 7\1/2\ KW; for Remote Operation of Taxiway Lights | Federal Aviation Administration, U.S. Department of Transportation | |
Geological Survey | 30 CFR 402.13(c) | OMB Circular A-67 | 1964 | Coordination of Federal Activities in the Acquisition of Certain Water Data | U.S. Office of Management and Budget | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5345-21 | 1964 | Specification for L-813 Static Indoor Type Constant Current Regulator Assembly; 4 KW and 7\1/2\ KW; for Remote Operation of Taxiway Lights | Federal Aviation Administration, U.S. Department of Transportation | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 571.5(d)(2) | ASTM B 117 | 1964 | Standard Method of Salt Spray (Fog) Testing | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.6(j)(2) | ASTM B 117 | 1964 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.2.3 | ASTM D 129 | 1964 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Coast Guard | 46 CFR 164.018-11(d)(5) | MIL-C-17415E | 1964 | Cloth, Coated, and Webbing, Inflatable Boat and Miscellaneous Use with Amendment 1 | U.S. Department of Defense | |
Research and Special Programs Administration | 49 CFR 173.315 Table Note 15 | ASTM D 1838 | 1964 | Copper Strip Corrosion by Liquefied Petroleum (LP) Gases | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.103 S4.3 | SAE J-902 | 1964 | Recommended Practice for Passenger Car Windshield Defrosting Systems | Society of Automotive Engineers | |
Wage and Hour Division | 29 CFR 570.51(b)(3)(ii) | IME Publication 2 | 1964 | American Table of Distances for Storage of Explosives | Institute of Makers of Explosives | |
Environmental Protection Agency | 40 CFR 62.14104(b) | ASME PTC 4.1 | 1964 | Power Test Codes: Test Code for Steam Generating Units (with 1968 and 1969 Addenda) | American Society of Mechanical Engineers | |
Food and Drug Administration | 16 CFR 1505.6(g)(5) | ANSI C96.1 | 1964 | Standard for Temperature Measurement Thermocouples | American National Standards Institute | |
Federal Aviation Administration | 14 CFR 152, Appendix B(a) | 150/5340-8 | 1964 | Airport 51-foot Tubular Beacon Tower | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 62.15265(a)(3) | ASME PTC 4.1 | 1964 | Test Code for Steam Generating Units | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.959(a)(1) | ASTM B 117 | 1964 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(r)(1) | NFPI Publication | 1964 | Definition and Test Procedures for Ammonium Nitrate Fertilizer | National Food Plant Institute | |
Federal Aviation Administration | 14 CFR 152.11(a) | 150/5340-8 | 1964 | Airport 51-foot Tubular Beacon Tower | Federal Aviation Administration, U.S. Department of Transportation | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ASTM D 1838 | 1964 | Copper Strip Corrosion by Liquefied Petroleum (LP) Gases | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(8) | SAE J-567b | 1964 | Bulb Sockets | Society of Automotive Engineers |