This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (60) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Research and Special Programs Administration | 49 CFR 195.3(c) A1 | AGA Project PR-3-805 | 1989 | A Modified Criterion for Evaluating the Remaining Strength of Corroded Pipe | American Gas Association | |
Energy Department | 10 CFR 430 Subpart B, App. M, 3.9.1 | ASHRAE 37 | 2005 | Method of Testing for Rating Unitary Air Conditioning and Heat Pump Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 58.10-5(b)(3)(i) | UL 1111 | 1988 | Marine Carburetor Flame Arresters | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.156-5(b)(5) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Environmental Protection Agency | 40 CFR 1066.425(j)(1)(iv) | SAE J-2951 | 2014 | Drive Quality Evaluation for Chassis Dynamometer Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 141.131(d)(2) | EPA Method 300.0 | 1993 | Ion chromatography - anions, Revision 2.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(78) | ASTM D 6420 | 2004 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Research and Special Programs Administration | 49 CFR 173.416(b) | IAEA TS-R-1 | 1996 | Regulations for the Safe Transport of Radioactive Material | International Atomic Energy Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA Method 531.1 | 1995 | Measurement of N-Methylcarbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post Column Derivatization | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41da Anthracite | ASTM D 388 | 1999 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 62.16015(e)(3)(i) | EPA-454/R-98-015 | 1997 | OAQPS Fabric Filter Bag Leak Detection Guidance | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24A, Section 7.1 | ASTM D 1475 | 1960 | Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products | ASTM International | |
Environmental Protection Agency | 40 CFR 52.741(u)(1)(i) | 35 I.A.C. 215, Subpart R | 1989 | Administrative Code | State of Illinois | |
Food and Drug Administration | 21 CFR 177.2400(c)(1) | FDA Publication | 1989 | Qualitative Identification of Kalrez by Infrared Examination of Pyrolystate | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 33 CFR 154.814(l)(5) | API 2000 | 1987 | Venting Atmospheric and Low-Pressure Storage Tanks | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 63.14(g)(58) | ASTM D 5066 | 1991 | Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints--Weight Basis | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(16) | API MPMS | 2005 | Chapter 5, Section 1 | American Petroleum Institute | |
Coast Guard | 46 CFR 148.8(b)(1) | IMSBC Code | 2009 | International Maritime Solid Bulk Cargoes Code and Supplement | International Maritime Organization | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (13) | APHA Method 3500-Ca B | 1997 | Calcium by EDTA Titrimetric Method | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 572.126(b) | Drawing No. 127-4014 | 1987 | Lower leg | Reprographic Technologies | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASTM C 1048 | 1991 | Standard Specification for Heat-Treated Flat Glass-Kind HS, Kind FT Coated and Uncoated Glass | ASTM International | |
Rural Utilities Service | 7 CFR 1755.890(i)(13) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association | |
Federal Aviation Administration | 14 CFR 36.6(c)(1)(v) | IEC 804 | 1985 | Integrating-averaging Sound Level Meters | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 60, Appendix B, PS-1, 2.1 | ASTM D 6216 | 1998 | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications | ASTM International | |
Food and Drug Administration | 21 CFR 184.1670(b) | Food Chemicals Codex | 1981 | Propylparaben | National Academy Press | |
Food and Drug Administration | 21 CFR 184.1349(b) | Food Chemicals Codex | 1981 | Karaya Gum (Sterculia Gum) | National Academy Press | |
Federal Motor Carrier Safety Administration | 49 CFR 393.7(b)(14) | SAE J-1292 | 1981 | Automobile, Truck, Truck-Tractor, Trailer, and Motor Coach Wiring | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (9) | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 12.05-3(c) | STCW Code | 1995 | Seafarer's Training, Certification and Watchkeeping Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xxvii) | ASTM D 1889 | 2000 | Standard Test Method for Turbidity of Water (Withdrawn 2007) | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(h)(2) | OECD No. 102 | 1995 | Guidelines for the Testing of Chemicals, Melting Point/Melting Range | Organization for Economic Cooperation and Development | |
Occupational Safety and Health Administration | 29 CFR 1910.261(h)(2)(iii) | 29 CFR 1910.134 | 2014 | Respiratory Protection | Occupational Safety and Health Administration, U.S. Department of Labor | |
Coast Guard | 40 CFR 136.3(a) Table IB (3) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (74) | APHA Method 3113 B | 2004 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 136.3(a) table IG (Norflurazon) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272, Subpart F | CAHWMP | 2014 | State of California Hazardous Waste Management Program (Reserved) | State of California | |
Environmental Protection Agency | 40 CFR 75.6(b)(3) | ASME MFC-5M | 1994 | Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 52.741(a)(10)(i) | ASTM D 2879 | 1986 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.101(c) | CGA S-1.2 | 1963 | Safety Release Device Standard--Cargo and Portable Tanks for Compressed Gases | Compressed Gas Association | |
Coast Guard | 21 CFR 150.140(d)(3) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Environmental Protection Agency | 40 CFR 72.2 EPA Protocol Gas Production Site | EPA-600-R-97-121 | 1997 | EPA Traceability Protocol for Assay and Certification of Gaseous Calibration Standards, as amended August 25, 1999 | U.S. Environmental Protection Agency | |
Energy Department | 10 CFR 434.701.1 RS-17 | ARI 310/380 | 1993 | Packaged Terminal Air-Conditioners and Heat Pumps (RS-17) | Air Conditioning and Refrigeration Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 179.100-20(a) | ASTM A 516/A 516M | 1990 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service | ASTM International | |
Coast Guard | 46 CFR 199.40(c)(1) | IMO Resolution A.520(13) | 1983 | Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-saving Appliances and Arrangements | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 571.108 S4 Color | CIE 1931 | 1931 | Chromaticity Diagram | International Commission on Illumination | |
Coast Guard | 46 CFR 64.2(b) | ASME B&PV Code | 1989 | Boiler and Pressure Vessel Code, Section VIII, Division 1 with Addenda Issued December 31, 1989 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 60.17(g)(20) | ASTM D 129 | 1964 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. M, 2.5.6 | ASHRAE 41.1 | 2001 | Standard Method for Temperature Measurement | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 162.050-4(d)(1) | UL 913 | 1976 | Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III Division 1, Hazardous (Classified) Locations | Underwriters Laboratories, Inc. |