This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Occupational Safety and Health Administration | 29 CFR 1910.6(k)(11) | CGA Publication | 1957 | Standard Hose Connection Standard | Compressed Gas Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (4-methyl-2-pentanone (MIBK)) | ASTM D 3695 | 1995 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 147.2400(b)(4) | WAUIC regulations | 1983 | Revised Code of Washington, chapter 78.52 (Bureau of National Affairs, 1983 Laws), entitled, Oil and Gas Conservation | State of Washington | |
Environmental Protection Agency | 40 CFR 63.11410(j)(1)(iii) | ASME PTC 19.10 | 1981 | Flue and Exhaust Gas Analyses [part 10, Instruments and Apparatus] | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.903(b)(2)(i) | ICEA S-110-717 | 2003 | Standard for Optical Drop Cable | Insulated Cable Engineers Association | |
Coast Guard | 46 CFR 116.405(f) | ASTM E 84 | 1998 | Standard Test Method for Surface Burning Characteristics of Building Materials | ASTM International | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 21.66(a) | National Formulary | 1980 | Formula No. 38-C | U.S. Pharmacopeial Convention | |
Food and Drug Administration | 16 CFR 1203.53(b) | ASTM F 1447 | 1994 | Standard Specification for Protective Headgear Used in Bicycling | ASTM International | |
Rural Utilities Service | 7 CFR 1728.201(j)(3) | AWPA A3 | 2008 | Standard Methods for Determining Penetration of Preservatives and Fire Retardants | American Wood Protection Association | |
Coast Guard | 46 CFR 56.01-2(d)(4) | ASME B16.1 | 1998 | Cast Iron Pipe Flanges and Flanged Fittings, Classes 25, 125, 250 | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 63.4941(b)(1) | ASTM D 6093 | 1997 | Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App B, 105.2.4 | ICC/IBC | 2003 | International Building Code | International Code Council | |
Coast Guard | 46 CFR 13.407 | IMO Resolution A.437 (XI) | 1979 | Training of Crews in Fire Fighting | International Maritime Organization | |
National Highway Traffic Safety Administration | 49 CFR 572.111(a)(4) | Drawing No. SA-SID-M050 | 1994 | Lumbar Spine Assembly, revision A | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 200.949(a)(1)(iv) | ISDSI 102 | 1984 | Installation Standard for Insulated Door Systems | Insulated Steel Door Institute | |
Energy Department | 10 CFR 431.15(b)(2) | IEEE 112 | 1996 | Test Procedure for Polyphase Induction Motors and Generators | Institute of Electrical and Electronics Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.75(d)(3)(ii) | ISO 9809-2 | 2000 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Greater than or Equal to 1 100 MPa | International Organization for Standardization | |
Federal Trade Commission | 16 CFR 460.5(a) | ASTM C 1045 | 2001 | Standard Practice for Calculating Thermal Transmission Properties from Steady-State Heat Flux Measurements | ASTM International | |
Environmental Protection Agency | 40 CFR 60.234(b)(3)(ii) | AOAC Method 9 | 1970 | Official Methods of Analysis, 11th Edition | AOAC International | |
Minerals Management Service | 30 CFR 250.1629(b)(4)(i) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Homeland Security Department | 6 CFR 37.17(e)(1) | ISO/IEC 19794-5:2005(E) | 2005 | Information technology—Biometric Data Interchange Formats—Part 5: Face Image Data | International Organization for Standardization / International Electrotechnical Commission | |
Federal Aviation Administration | 14 CFR 71.31 | FAA Order 7400.9X | 2013 | Airspace Designations and Reporting Points | Federal Aviation Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (101) | ASTM D 4657 | 1998 | Standard Test Method for Polynuclear Aromatic Hydrocarbons in Water (Withdrawn 2005) | ASTM International | |
Environmental Protection Agency | 40 CFR 141.131(b)(1) Table | EPA Method 552.3 | 2003 | Determination of Haloacetic Acids and Dalapon in Drinking Water by Liquid-Liquid Microextraction, Derivitization, and Gas Chromatography With Electron Capture Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(27) | ASTM D 2879 | 1996 | Standard Test Method for Vapor Pressure--Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(45) | ANSI S1.11 | 1976 | Specification for Octave, Half-Octave and Third-Octave Band Filter Sets | American National Standards Institute | |
Coast Guard | 46 CFR 160.023-3(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (64) | ASTM D 1125A | 1999 | Standard Test Methods for Electrical Conductivity and Resistivity of Water, Field and Routine Laboratory Measurement of Static (Non-Flowing) Samples | ASTM International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table Note 11 | Industrial Method 380-75WE | 1976 | Fluoride in Water and Wastewater | Bran & Luebbe Analyzing Technologies, Inc. | |
Environmental Protection Agency | 40 CFR 60.41c Natural gas (2) | ASTM D 1835 | 2003 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 571.139 S3 Snow tire | ASTM F 1805 | 2000 | Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces | ASTM International | |
Federal Communications Commission | 47 CFR 15.118(c)(2) | EIA-IS-132 | 1994 | Cable Television Channel Identification Plan | Electronic Industries Association | |
Research and Special Programs Administration | 49 CFR 179.200-17(a)(1) | AAR Publication | 2000 | Specification for Tank Cars, Appendix E | Association of American Railroads | |
Energy Department | 10 CFR 431.86(c)(2)(i)(B) | HI BTS-2000 | 2001 | Method to Determine Efficiency of Commercial Space Heating Boilers | Hydronics Institute | |
Coast Guard | 46 CFR 57.03-1(b)(1) | ASME B&PV Code | 1989 | Boiler & Pressure Vessel Code, Section IX, Welding and Brazing Qualifications | American Society of Mechanical Engineers | |
National Highway Traffic Safety Administration | 49 CFR 581.6(b)(1) | SAE J-449a | 1963 | Surface Texture Control | Society of Automotive Engineers | |
Coast Guard | 46 CFR 160.176-13(y)(1) | Federal Standard 191A | 1978 | Method 5100, Strength and Elongation, Breaking of Woven Cloth: Grab Method | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 56.01-2(e)(57) | ASTM B 165 | 1993 | Standard Specification for Nickel-Copper Alloy Seamless Pipe and Tube | ASTM International | |
Energy Department | 10 CFR 430 Subpart B, App. B, 1.8 | AHAM HRF-1 | 2008 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Environmental Protection Agency | 40 CFR 63.626(c)(3)(ii)(C) | AFPC Book of Methods | 1991 | Section IX, Methods of Analysis for Phosphate Rock, No. 3 Phosphorus-P2O5 or Ca3(PO4)2, Method B—Gravimetric Quimociac Method | Association of Florida Phosphate Chemists | |
Coast Guard | 46 CFR 160.156-11(c)(2)(i)(B) | ASTM D 638 | 2008 | Standard Test Method for Tensile Properties of Plastics | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (6) | EPA Method 200.7 | 1994 | ICP - metals, Revision 4.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(13)(i)(M) | AOAC Method 973.51 | 1998 | Chloride in Water - Mercuric Nitrate Method | AOAC International | |
Environmental Protection Agency | 40 CFR 799.5085(j) Table 3, C6 | ASTM E 1218 | 2004 | Standard Guide for Conducting Static Toxicity Tests with Microalgae | ASTM International | |
Coast Guard | 46 CFR 56.30-25(a) | ASTM F 1387 | 1993 | Standard Specification for Performance of Mechanically Attached Fittings | ASTM International | |
Environmental Protection Agency | 40 CFR 98.254(d)(2) | ASTM D 1945 | 2003 | Standard Test Method for Analysis of Natural Gas by Gas Chromatography | ASTM International | |
Housing and Urban Development Department | 24 CFR 3285.606(a) | UL 181B | 1995 | Standard for Safety Closure Systems for use with Flexible Air Ducts and Air Connectors, First Edition, with 1998 revisions | Underwriters Laboratories, Inc. | |
Food and Drug Administration | 21 CFR 172.736(b)(2) | Food Chemicals Codex | 2004 | Hydroxyl Value | National Academy Press | |
National Highway Traffic Safety Administration | 49 CFR 572.136(b)(1) | Drawing No. 880105-660 | 1987 | Ankle assembly | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Endrin) | EPA Method 525.1 | 1988 | Determination of Organic Compounds in Drinking Water by Liquid-Solid Extraction and Capillary Column Gas Chromatography/Mass Spectrometry | U.S. Environmental Protection Agency |