This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Research and Special Programs Administration | 45 CFR 162.1802(b)(1) | ASC X12N 837 | 2000 | Health Care Claim: Dental, version 4010 | Washington Publishing Company | |
Environmental Protection Agency | 40 CFR 86.1803-01 LEV III | CA State Regulations | 1999 | LEV III emission standards in Title 13, §§1961.2 and 1976 of the California Code of Regulations | California Air Resources Board | |
Coast Guard | 46 CFR 52.01-95(f) | ASME B&PV Code | 2001 | Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (44) | AOAC Method 973.55 | 2014 | Phosphorus in water, Photometric method | AOAC International | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (16) | APHA Method 4500-Cl D | 1997 | Chlorine, Amperometric direct | American Public Health Association | |
Coast Guard | 46 CFR 54.15-10(h)(1) | CGA S-1.2.5.2 | 1979 | Flow Test of Safety Relief Valves | Compressed Gas Association | |
Coast Guard | 46 CFR 54.05-20(b) | ASTM A 203/A 203M | 2007 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(i)(1) | ASTM C 33 | 2007 | Standard Specification for Concrete Aggregates | ASTM International | |
Coast Guard | 46 CFR 160.151-15(p) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1043.70(a) | IMO Publication | 2008 | International Convention on the Prevention of Pollution from Ships, MARPOL Annex VI, Regulation 14 | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG Footnote 3 | EPA Method 617 | 1993 | Organohalide Pesticides and PCBs by Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (5) | EPA Method 150.1 | 1982 | pH, Electrometric Method | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.055-3(j), Table 160.055-3(j) | ASTM D 882 | 1997 | Standard Test Method for Tensile Properties of Thin Plastic Sheeting | ASTM International | |
Environmental Protection Agency | 40 CFR 86.113-94(b)(3) | ASTM D 613 | 2013 | Standard Test Method for Cetane Number of Diesel Fuel Oil | ASTM International | |
Food and Drug Administration | 21 CFR 177.1520(b) | FDA Publication | 1993 | Determination of Total Acrylic in PP-MMA/BA Polymers | Food and Drug Administration, U.S. Department of Health and Human Services | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IF (1,2-Dichloroethane) | ASTM D 3695 | 1995 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 147.950(a)(3)(iv) | LAUIC regulations | 1982 | Amendment to Statewide Order No. 29-B (Amendment concerning the underground injection control of saltwater disposal wells, enhanced recovery injection wells, and liquid hydrocarbon storage wells) (effective February 20, 1982) | State of Louisiana | |
Environmental Protection Agency | 40 CFR 63.11237 Natural gas (2) | ASTM D 1835 | 2005 | Standard Specification for Liquefied Petroleum (LP) Gases | ASTM International | |
Rural Utilities Service | 7 CFR 1755.506(h) | IEEE C2 | 1997 | National Electrical Safety Code | Institute of Electrical and Electronics Engineers | |
Coast Guard | 40 CFR 60, Appendix A-5, Method 13A, Section 16.1 | ASTM D 3270 | 1995 | Standard Test Method for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) | ASTM International | |
Coast Guard | 21 CFR 155.3(e) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Food and Drug Administration | 21 CFR 178.3780(b)(3) | AOCS Method Trla-64T | 2012 | Saponification Value | American Oil Chemists Society | |
Rural Utilities Service | 7 CFR 1728.97(e)(11) | AWPA P5 | 2008 | Standard for Waterborne Preservatives | American Wood Protection Association | |
Coast Guard | 33 CFR 154.810(d)(5)(i) | ANSI B16.5 | 1988 | Steel Pipe Flanges and Pipe Fittings | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 63.4141(c) | ASTM D 1475 | 1998 | Standard Test Method for Density of Liquid Coatings, Inks, and Related Products | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App D, 408.3.2.1 | BHMA A156.19 | 1997 | Power Assist and Low Energy Power Operated Doors | Builders Hardware Manufacturers Association | |
Coast Guard | 46 CFR 120.320(d) | NFPA 70 | 1996 | National Electrical Code (NEC) Article 445 | National Fire Protection Association | |
National Highway Traffic Safety Administration | 49 CFR 572.75(a) | Drawing No. SA 106C 001 | 1997 | Specifications for an Anthropomorphic Test Dummy Representing a 6-year-old Child, sheet 13 | Reprographic Technologies | |
Mine Safety and Health Administration | 30 CFR 56.14130(h) | SAE J-1194 | 1999 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Energy Department | 10 CFR 431.86(b) | HI BTS-2000 | 2001 | Method to Determine Efficiency of Commercial Space Heating Boilers | Hydronics Institute | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | DLAR 8220.1 | 1998 | Explosive Hazard Classification Procedures | U.S. Department of Defense | |
Consumer Product Safety Commission | 16 CFR 1616.32(a)(1) | AATCC 124 | 1996 | Appearance of Durable Press Fabrics After Repeated Home Laundering | American Association of Textile Chemists and Colorists | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 24, Section 6.5 | ASTM D 4457 | 1991 | Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph | ASTM International | |
Minerals Management Service | 30 CFR 250.1900(a) | API RP 75 | 2008 | Development of a Safety and Environmental Management Program for Offshore Operations and Facilities | American Petroleum Institute | |
Environmental Protection Agency | 40 CFR 136.3(b)(32)(i) | 3M Test Method 0222 | 1994 | Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk | 3M Corporation | |
Geological Survey | 30 CFR 402.13(b) | OMB Circular A-67 | 1964 | Coordination of Federal Activities in the Acquisition of Certain Water Data | U.S. Office of Management and Budget | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (91) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.74(a)(2) Table Note 2 | APHA Standard Methods On-Line | 2014 | On-line editions of Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Environmental Protection Agency | 40 CFR 61.18(a)(7) | ASTM D 2382 | 1988 | Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 28, Section 16.1.1 | ASTM D 4442 | 1984 | Standard Test Method for Direct Moisture Content Measurement of Wood and Wood-Based Materials | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1926.453(b)(3) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (62) | AOAC Method 974.27 | 1988 | Metals (Cd, Cr, Cu, Fe, Pb, Mg, Mn, As, and Zn) in Water - Atomic Absorption Spectrophotometric Method | AOAC International | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (23) Silica | APHA Method 4500-SiO2 F | 1992 | Flow Injection Analysis for Molybdate-Reactive Silicate | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.251(q) Subbituminous coal | ASTM D 388 | 1977 | Standard Classification of Coals by Rank | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.869(b) | API RP 14C | 2001 | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms | American Petroleum Institute | |
National Highway Traffic Safety Administration | 49 CFR 572.15(a) | Drawing No. SA 103C 020 | 1976 | Neck Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Housing and Urban Development Department | 24 CFR 200.926d(d)(1)(i) | HUD Handbook 4950.1 | 1988 | Technical Suitability of Products Program, Technical and Processing Procedures | U.S. Department of Housing and Urban Development | |
Research and Special Programs Administration | 49 CFR 179.102-1(a)(1) | ASTM A 20/A 20M | 1993 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | ASTM International | |
Energy Department | 10 CFR 430.3(g)(5) | AHAM RAC-1 | 2008 | Room Air Conditioners | Association of Home Appliance Manufacturers | |
Coast Guard | 46 CFR 56.60-2 Table 56.60-2(a) Footnote 13 | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (1998 with 1999 and 2000 addenda) | American Society of Mechanical Engineers |