This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation | CFR Citation | Document Number | Document Edition / Year Sort descending | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 435 Appendix 7, Subpart A | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1926.97 Table E-2 Note | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Energy Department | 87 FR 50396 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Ceiling Fans | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 86.1(g)(1) | SAE J-1151 | 2011 | Methane Measurement Using Gas Chromatography | Society of Automotive Engineers | |
National Highway Traffic Safety Administration | 49 CFR 572.175(a) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Public Health Service | 42 CFR 37.10(f)(4) | DICOM Standard PS 3.11-2011 | 2011 | Digital Imaging and Communications in Medicine (DICOM) standard, Part 11: Media Storage Application Profiles | National Electrical Manufacturers Association | |
Homeland Security Department | 88 FR 16310 | 46 CFR 112 | IEEE 45.2–2011 | 2011 | Update to Electrical Engineering Regulations | Institute of Electrical and Electronics Engineers |
Federal Motor Carrier Safety Administration | 49 CFR 384.231(d) | CDLIS | 2011 | Commercial Driver's License Information System (CDLIS) State Procedures Manual, Release 5.2.0 | American Association of Motor Vehicle Administrators, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.170(b)(2)(viii) | Drawing No. 420-7000-1 | 2011 | Complete Arm Assembly—left | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(1) | Part No. 420-0000 | 2011 | Engineering drawings and specifications | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Energy Department | 88 FR 31102 | 10 CFR 430 | IEC 62301:2011 | 2011 | Energy Conservation Program: Test Procedure for Portable Air Conditioners | International Electrotechnical Commission |
Environmental Protection Agency | 40 CFR 86.1867-12(b)(1) | SAE J-2064 | 2011 | R134a Refrigerant Automotive Air-Conditioned Hose | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 435.13 Note 11 | EPA Method 1674 | 2011 | Determination of the Amount of Non-Aqueous Drilling Fluid (NAF) Base Fluid from Drill Cuttings by a Retort Chamber (Derived from API Recommended Practice 13B-2) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 86 FR 34308 | 40 CFR 1066 | Greenhouse Gas Emissions Model (GEM) version 2.0.1 | 2011 | Improvements for Heavy-Duty Engine and Vehicle Test Procedures, and Other Technical Amendments | U.S. Environmental Protection Agency |
Coast Guard | 40 CFR 1065.701 Table 1 | ASTM D 6615 | 2011 | Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel | ASTM International | |
Energy Department | 87 FR 55090 | 10 CFR 429 | IEC 62040-3:2011 | 2011 | Energy Conservation Program: Test Procedure for Battery Chargers | International Electrotechnical Commission |
National Highway Traffic Safety Administration | 49 CFR 572.172(a) | Drawing No. 420-1000 | 2011 | Head Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
National Highway Traffic Safety Administration | 49 CFR 572.177(b)(6) | Drawing No. 420-4000 | 2011 | Lower Torso Assembly | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 45 CFR 162.920(c)(1)(v) | CAQH Publication | 2011 | Phase I CORE 156: Eligibility and Benefits Real Time Response Time Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Occupational Safety and Health Administration | 29 CFR 1926.6(h)(30) | ANSI Z535.5 | 2011 | Safety Tags and Barricade Tapes (for Temporary Hazards) | American National Standards Institute | |
Occupational Safety and Health Administration | 29 CFR 1926.97(a) Note to paragraph (a) | ASTM D 1050 | 2011 | Standard Specification for Rubber Insulating Line Hose | ASTM International | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1090 | SAE J1025_201208 | 2012 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | SAE International |
Environmental Protection Agency | 40 CFR 1051.501(d)(3) | 40 CFR 1065.710 | 2012 | Gasoline | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 160.055-5(b)(1) | Drawing No. 160.055-1A, Sheet 2 | 2012 | Life Preservers, Unicellular Plastic Foam, Adult, Construction and Arrangement, Vinyl Dip Coated, Model 66, Child | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.049-4(d) | Drawing No. 160.049-1 | 2012 | Buoyant Cushion, Plastic Foam | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.077-19(c)(7)(i) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Institute of Standards and Technology | 15 CFR 200.115(a) | NIST SP 250 | 2012 | National Institute of Standards and Technology | National Institute of Standards and Technology, U.S. Department of Commerce | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1051 | GEM version 2.0.1 | 2012 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | U.S. Environmental Protection Agency |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 2 | GEM version 2.0.1 | 2012 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | U.S. Environmental Protection Agency |
Coast Guard | 46 CFR 160.049-1(a)(3) | 46 CFR 160.055 | 2012 | Life Preserver, Unicellular Plastic Foam, Adult and Child | U.S. Coast Guard | |
Coast Guard | 46 CFR 28.380(h) Note | DOC FF 4-72.16 | 2012 | Standard for Mattress Flammability | U.S. Department of Commerce | |
Safety and Environmental Enforcement Bureau | 84 FR 21969 | 30 CFR 250.198(e)(94) | API Standard 53 | 2012 | Blowout Prevention Equipment Systems for Drilling Wells | American Petroleum Institute |
Safety and Environmental Enforcement Bureau | 84 FR 24705 | 30 CFR 250.842(a)(1)(v) | API RP 500 | 2012 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 | American Petroleum Institute |
Homeland Security Department | 88 FR 16310 | 46 CFR 113 | UL 844 2012 | 2012 | Update to Electrical Engineering Regulations | Underwriters Laboratories, Inc. |
Coast Guard | 46 CFR 160.060-1(b) | Drawing No. 160.060-1, Sheet 4 | 2012 | Buoyant Vest, Unicellular Polyethylene Foam, Adult and Child, Insert Pattern, Model AY | U.S. Coast Guard | |
Coast Guard | 46 CFR 160.077-21(c)(2) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 160.077-6(a)(3)(v) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix A Section 1910.156 (5) | NFPA 1041 | 2012 | Standard for Fire Service Instructor Professional Qualifications | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 80.46(h)(1)(i) | ASTM D 86 | 2012 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | NFPA 70E | 2012 | Electrical Safety in the Workplace | National Fire Protection Association | |
Coast Guard | 46 CFR 161.006-1(a)(1) | NSSC 42S5 | 2012 | Screws, machine, cap and set, and nuts | Navy Supply Systems Command | |
Transportation Department | 87 FR 44944 | 49 CFR 176 | ISO 11119–2:2012(E) | 2012 | Hazardous Materials: Harmonization With International Standards | International Organization for Standardization |
Environmental Protection Agency | 40 CFR 1065.710 Table 2 | ASTM D 3237 | 2012 | Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy | ASTM International | |
Environmental Protection Agency | 88 FR 44468 | 40 CFR 80 | API MPMS 14.3.1–2012 | 2012 | Renewable Fuel Standard (RFS) Program: Standards for 2023-2025 and Other Changes | American Petroleum Institute |
Coast Guard | 46 CFR 160.002-3(g) | DWG No. F-49-6-1 (Sheet 1) | 2012 | Cutting Pattern and General Arrangement (Adult) | U.S. Coast Guard | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 1043 | GEM version 2.0.1 | 2012 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | U.S. Environmental Protection Agency |
Coast Guard | 23 CFR 655.602 | FHWA Publication | 2012 | Manual on Uniform Traffic Control Devices for Streets and Highways (MUTCD), including Revisions No. 1 and No. 2 | Federal Highway Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 88 FR 4296 | 40 CFR 59 | GEM version 2.0.1 | 2012 | Control of Air Pollution From New Motor Vehicles: Heavy-Duty Engine and Vehicle Standards | U.S. Environmental Protection Agency |
Environmental Protection Agency | 86 FR 66045 | 40 CFR 63 | ASTM D6348–12e1 | 2012 | National Emission Standards for Hazardous Air Pollutants: Refractory Products Manufacturing Residual Risk and Technology Review | ASTM International |
Environmental Protection Agency | 40 CFR 272.951(c)(1)(i) | LAHWMP | 2012 | EPA-Approved Louisiana Statutory and Regulatory Requirements Applicable to the Hazardous Waste Management Program | State of Louisiana |