This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
National Highway Traffic Safety Administration | 49 CFR 572.77(b)(1) | Drawing No. SA 106C 001 | 1997 | Specifications for an Anthropomorphic Test Dummy Representing a 6-year-old Child, sheet 1 | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 60.45(f)(5)(i) | ASTM D 1137 | 1975 | Standard Method for Analysis of Natural Gases and Related Types of Gaseous Mixtures by the Mass Spectrometer | ASTM International | |
Federal Communications Commission | 47 CFR 80.1101(c)(12)(iii) | IEC 61162-1 | 2000 | Maritime Navigation and Radiocommunication Equipment and Systems--Digital interfaces--Part 1: Single Talker and Multiple Listeners | International Electrotechnical Commission | |
Rural Utilities Service | 7 CFR 1755.860(n)(5) | ASTM D 4565 | 1990 | Standard Test Method for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunication Wire and Cable | ASTM International | |
Rural Utilities Service | 7 CFR 1728.97(c)(2) | ANSI O5.3 | 2008 | American National Standard for Wood Poles and Wood Products, Solid Sawn-Wood Crossarms & Braces—Specifications & Dimensions | American National Standards Institute | |
Alcohol, Tobacco, Firearms, and Explosives Bureau | 27 CFR 4.65(b)(2) | ASTM Special Technical Publication (STP) 434 | 1968 | Manual on Sensory Testing Methods | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (93) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Coast Guard | 46 CFR 56.15-1(e) | MSS SP-25 | 1998 | Standard Marking System for Valves, Fittings, Flanges and Unions | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Energy Department | 10 CFR 434.402.1.1 | ASHRAE Handbook | 1993 | Fundamentals (RS-4) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Energy Department | 10 CFR 431.66(d)(2)(i) | ARI 1200 | 2006 | Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets | Air Conditioning and Refrigeration Institute | |
Rural Utilities Service | 7 CFR 1728.97(a)(3) | RUS Bulletin 50–16 (DT–4) | 1952 | RUS Specification for Angle Suspension Brackets | Rural Utilities Service, U.S. Department of Agriculture | |
National Highway Traffic Safety Administration | 49 CFR 572.100(b)(1) | Drawing No. 92041-001 | 1992 | Head Form Assembly | Reprographic Technologies | |
Coast Guard | 46 CFR 181.425(a) | UL 710 | 1993 | Exhaust Hoods for Commercial Cooking Equipment | Underwriters Laboratories, Inc. | |
Food and Drug Administration | 21 CFR 184.1081(b) | Food Chemicals Codex | 1981 | Propionic Acid | National Academy Press | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (62) | ASTM D 1976 | 2007 | Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy | ASTM International | |
Public Health Service | 42 CFR 52b.12(c)(9) | ACGIH Publication | 1998 | Industrial Ventilation Manual: A Manual of Recommended Practice | American Conference of Governmental Industrial Hygienists | |
Mine Safety and Health Administration | 30 CFR 57.14130(j) | SAE J-1194 | 1983 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 90, Subpart D, Appendix A, Table 3 | ASTM D 2700 | 1992 | Standard Test Method for Knock Characteristics of Motor and Aviation Fuels | ASTM International | |
Environmental Protection Agency | 40 CFR 141.131(c)(1) Table (Syringaldazine (FACTS)) | APHA Method 4500-Cl H | 2000 | Chlorine, Syringaldazine (FACTS) | American Public Health Association | |
Environmental Protection Agency | 40 CFR 63.14(g)(65) | ASTM D 5864 | 2011 | Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components | ASTM International | |
Food and Drug Administration | 21 CFR 177.1520(d)(7) | ASTM D 1238 | 1982 | Standard Method of Measuring Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.97(a)(3)(ii) | ANSI Z53.1 | 1967 | Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA Method 504.1 | 1995 | 1,2-Dibromoethane (EDB), 1,2-Dibromo-3-Chloropropane (DBCP), and 1,2,3- Trichloropropane (123TCP) in Water by Microextraction and Gas Chromatography - Revision 1.1 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41b Pulverized coal-fired steam generating unit (Residual oil) | ASTM D 396 | 1989 | Standard Specification for Fuel Oils | ASTM International | |
Environmental Protection Agency | 40 CFR 60.5580 | ASTM D396-98 | 1998 | Standard Specification for Fuel Oils | ASTM International | |
Energy Department | 10 CFR 434.403.2.4.1 | ASHRAE 62 | 1989 | Ventilation for Acceptable Indoor Air Quality (RS-41) | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM A 403/A 403M | 1998 | Wrought Austenitic Stainless Steel Piping Fittings | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.15(a) | Drawing No. SA 103C 042 | 1976 | Upper Arm Assembly Right | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Coast Guard | 46 CFR 56.70-10(b) | ASME B31.1 | 2001 | Power Piping ASME Code for Pressure Piping | American Society of Mechanical Engineers | |
Coast Guard | 40 CFR 60.106(j)(2) | ASTM D 129 | 1995 | Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | ASTM International | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 195.264(b)(1) | NFPA 30 | 2003 | Flammable and Combustible Liquids Code | National Fire Protection Association | |
Health and Human Services Department | 45 CFR 162.920(c)(1)(i) | CAQH Publication | 2011 | Phase I CORE 152: Eligibility and Benefit Real Time Companion Guide Rule, version 1.1.0 | Council for Affordable Quality Healthcare's (CAQH) Committee on Operating Rules for Information Exchange (CORE) | |
Coast Guard | 46 CFR 160.156-7(b)(3)(iii) | ASTM B 209 | 2007 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IA Note 23 | EPA Method 1682 | 2006 | Salmonella in Sewage Sludge (Biosolids) by Modified Semisolid Rappaport-Vassiliadis (MSRV) Medium | U.S. Environmental Protection Agency | |
Coast Guard | 40 CFR 136.3(a) Table IF (Chloroform) | EPA Method 551 | 1990 | Chlorination Disinfection Byproducts, Liquid/Liquid Extraction and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(42) | ASTM D 3792 | 1991 | Standard Method for Water Content of Water-Reducible Paints by Direct Injection into a Gas Chromatograph | ASTM International | |
Research and Special Programs Administration | 40 CFR 136.3(a) Table IB (25) | APHA Method 4500-F D | 1997 | Fluoride by SPADNS Method | American Public Health Association | |
National Highway Traffic Safety Administration | 49 CFR 572.130(a)(5) | SAE J-1733 | 1994 | Sign Convention for Vehicle Crash Testing | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 60, Appendix A-8, Method 29, Section 13.2.1 | EPA Method 6010 | 1986 | Test Methods for Evaluating Solid Waste, Physical/Chemical Methods, SW-846 Third Edition | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(b)(15)(xix) | ASTM D 1253 | 2008 | Standard Test Method for Residual Chlorine in Water | ASTM International | |
Environmental Protection Agency | 40 CFR 799.5087(h)(2) | ASTM E 1782 | 2008 | Standard Test Method for Determining Vapor Pressure by Thermal Analysis | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910 Subpart L Appendix B 1910.162 | ANSI/NFPA 12 | 2014 | Carbon Dioxide Systems | National Fire Protection Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Methomyl) | EPA Method 632 | 1993 | Carbamate and Urea Pesticides by Liquid/Liquid Extraction and HPLC/UV-VIS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 272, Subpart CCC | VIHMWP | 2014 | Territory of the Virgin Islands Hazardous Waste Management Program (Reserved) | Virgin Island Territory | |
Environmental Protection Agency | 40 CFR 75.6(a)(32) | ASTM D 4052 | 2002 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter | ASTM International | |
Safety and Environmental Enforcement Bureau | 30 CFR 250.198(h)(54) | API RP 2T | 1997 | Planning, Designing and Constructing Tension Leg Platforms | American Petroleum Institute | |
Coast Guard | 46 CFR 154.172 Table 1 | ABS Publication | 1981 | Rules for Building and Classing Steel Vessels | American Bureau of Shipping | |
Minerals Management Service | 30 CFR 250.1202(a)(3)(vi) | API MPMS | 2005 | Chapter 12, Section 2, Part 4 | American Petroleum Institute | |
Coast Guard | 46 CFR 160.052-1(b) | Drawing No. 160.052-1, Sheet 1 | 2012 | Buoyant Vest, Unicellular Plastic Foam, Adult and Child, Cutting Pattern and General Arrangement, Model AP | U.S. Coast Guard | |
Rural Utilities Service | 7 CFR 1755.890(p)(5)(v) | ICEA S-84-608 | 1988 | Standard for Telecommunications Cable, Filed, Polyolefin Insulated, Copper Conductor Technical Requirements | Insulated Cable Engineers Association |