This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) Sort descending | FR Citation | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.151-15(f) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Coast Guard | 46 CFR 160.135-11(c)(2)(i)(B) | ISO 527-1:1993(E) | 1993 | Plastics—Determination of tensile properties, part 1: General Principles, First Edition | International Organization for Standardization | |
Coast Guard | 46 CFR 160.151-33(b) | IMO Resolution MSC.293(87) | 2010 | Annex 7 to MSC 87/26, Report of the Maritime Safety Committee on its Eighty-Seventh Session, Resolution MSC.293(87), Adoption of Amendments to the International Life-Saving Appliance (LSA) Code | International Maritime Organization | |
Coast Guard | 40 CFR 1065.705 Table 1 | IP-501 | 2005 | Determination of aluminum, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus in residual fuel oil by ashing, fusion and inductively coupled plasma emission spectrometry | Energy Institute | |
Coast Guard | 46 CFR 160.052-1(a)(4) | 46 CFR 164.015 | 2012 | Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shapes | U.S. Coast Guard | |
Coast Guard | 46 CFR 111.60-1(d) | IEEE Std 1580 | 2001 | Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Platforms | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 160.156-11(c)(2)(i)(A) | MIL-R-21607E(SH) | 1990 | Military Specification, Resins, Polyester, Low Pressure Laminating, Fire-Retardant | U.S. Department of Defense | |
Coast Guard | 46 CFR 25.45-2(b)(2) | ABYC A-22 | 1978 | Marine Compressed Natural Gas Systems | American Boat and Yacht Council | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) | ASTM B 234 | 1995 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers | ASTM International | |
Coast Guard | 33 CFR 155.140(e)(2) | NFPA 1005 | 2007 | Standard for Professional Qualifications for Marine Fire Fighting for Land-Based Fire Fighters | National Fire Protection Association | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(a) Footnote 11 | ASTM A 520 | 1997 | Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction | ASTM International | |
Coast Guard | 46 CFR 160.043-1(b)(1) | DWG. No. 160.043-1(b) | 2012 | Jackknife (With Can Opener) | U.S. Coast Guard | |
Coast Guard | 40 CFR 136.3(a) Table IB (4) | Method 4500-NH3 B | 1997 | Ammonia Nitrogen Distillation | American Public Health Association | |
Coast Guard | 46 CFR 161.006-4(k) | NSSC 43B11 | 2012 | Bolts, nuts, studs, and tap-rivets | Navy Supply Systems Command | |
Coast Guard | 46 CFR 56.01-2(d)(18) | ASME B16.25 | 2003 | Buttwelding Ends | American Society of Mechanical Engineers | |
Coast Guard | 30 CFR 75.1107-17 | NFPA 15 | 1969 | Standard for Water Spray Fixed Systems for Fire Protection | National Fire Protection Association | |
Coast Guard | 21 CFR 109.30(d) | FDA Publication | 1979 | Analytical Methodology for Polychlorinated Biphenyls | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.076-21(a) | UL 1180 | 2009 | Fully Inflatable Recreational Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 111.70-3(a) | IEC 92-201 | 1994 | Electrical Installation in Ships, Part 201: System Design-General, Fourth Edition | International Electrotechnical Commission | |
Coast Guard | 46 CFR 164.015-4(g)(2) | ASTM D 1692T | 1968 | Test for Flammability of Plastic Sheeting and Cellular Plastics | ASTM International | |
Coast Guard | 46 CFR 160.055-1(a)(4) | ASTM D 413 | 1993 | Standard Test Method for Rubber Property--Adhesion to Flexible Substrate | ASTM International | |
Coast Guard | 33 CFR 126.5(b) | ASTM F 1121 | 1987 | Standard Specification for International Shore Connections for Marine Fire Applications | ASTM International | |
Coast Guard | 46 CFR 111.60-1(a) | MIL-C-24643A | 1994 | Military Specification Cables and Cords, Electric, Low Smoke, for Shipboard Use, General Specification for (1996) Amendment 2 | U.S. Department of Defense | |
Coast Guard | 46 CFR 56.15-1(e) | MSS SP-25 | 1998 | Standard Marking System for Valves, Fittings, Flanges and Unions | Manufacturers Standardization Society of the Valve and Fittings Industry | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(d)(1)(vi) | ASTM D 570 | 2005 | Standard Test Method for Water Absorption of Plastics | ASTM International | |
Coast Guard | 33 CFR 183.516(a)(1)(ii) | ASTM D 471 | 1996 | Standard Test Method for Rubber Property--Effect of Liquids | ASTM International | |
Coast Guard | 46 CFR 160.055-1(a)(4) | ASTM D 570 | 1995 | Standard Test Method for Water Absorption in Plastics | ASTM International | |
Coast Guard | 46 CFR 161.006-1(a)(1) | NSSC 43B11 | 2012 | Bolts, nuts, studs, and tap-rivets | Navy Supply Systems Command | |
Coast Guard | 33 CFR 127.201(c)(1) | NFPA 70 | 1993 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 21 CFR 165.110(b)(4)(iii)(E)(2)(i) | EPA-600-4-79-020 | 1983 | Method 208.2--Atomic Absorption: furnace technique | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 175.600(b) Table | UL 1113 | 1997 | Electrically Operated Pumps for Nonflammable Liquids, Marine, Third Edition | Underwriters Laboratories, Inc. | |
Coast Guard | 46 CFR 54.25-15(b) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 114.400(b), Flashpoint | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Coast Guard | 46 CFR 116.423(a)(4) | ASTM E 648 | 1997 | Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source | ASTM International | |
Coast Guard | 46 CFR 175.600(b) Table | ASTM B 117 | 1997 | Standard Practice for Operating Salt Spray (Fog) Apparatus | ASTM International | |
Coast Guard | 46 CFR 132.350(c)(1) | NFPA 10 | 1993 | Portable Fire Extinguishers | National Fire Protection Association | |
Coast Guard | 46 CFR 39.6001(g) | OCIMF Publication | 2006 | International Safety Guide for Oil Tankers and Terminals | Oil Companies International Marine Forum | |
Coast Guard | 46 CFR 56.60-1(b) Table 56.60-1(b) | ASME B16.23 | 2002 | Cast Copper Alloy Solder Joint Drainage Fittings: DWV | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.176-4(b) | ASTM D 975 | 1998 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Coast Guard | 46 CFR 120.340(d)(1) | NFPA 70 | 1996 | National Electrical Code (NEC) Section 310-13 | National Fire Protection Association | |
Coast Guard | 46 CFR 63.15-5(c) | UL 296 | 1993 | Oil Burners | Underwriters Laboratories, Inc. | |
Coast Guard | 40 CFR 136.3(a) Table IA | APHA Method 9221 B | 2006 | Standard Methods for the Examination of Water and Wastewater | American Public Health Association | |
Coast Guard | 46 CFR 153.4(b) | ANSI B16.24 | 1979 | Bronze Pipe Flanges and Flanged Fittings, Classes 150 and 300 | American National Standards Institute | |
Coast Guard | 33 CFR 127.603(a) | NFPA 10 | 1994 | Standard for Portable Fire Extinguishers | National Fire Protection Association | |
Coast Guard | 46 CFR 199.70(a)(1)(iii) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-Saving Appliances and Arrangements | International Maritime Organization | |
Coast Guard | 46 CFR 54.10-5(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels (with 1999 and 2000 addenda) | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 111.60-23(f) | NEC 2002 | 2002 | National Electrical Code Handbook | National Fire Protection Association | |
Coast Guard | 46 CFR 111.81-1(d) | IEC 60092-101 | 2002 | Electrical Installation in Ships, Part 101: Definitions and General Requirements, Edition 4.1 | International Electrotechnical Commission | |
Coast Guard | 46 CFR 28.40(b) | ABYC H-2 | 1989 | Ventilation of Boats Using Gasoline | American Boat and Yacht Council | |
Coast Guard | 40 CFR 60.111a(b) Petroleum liquids | ASTM D 396 | 1996 | Standard Specification for Fuel Oils | ASTM International |