This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 141.21(f)(3) Note | ONPG-MUG Test | 1989 | Autoanalysis Colilert System | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 799.6755(f)(8) | OECD No. 107 | 1995 | Guidelines for Testing of Chemicals, Partition Coefficient (n-octanol/water) (Shake Flask Method) | Organization for Economic Cooperation and Development | |
Environmental Protection Agency | 40 CFR 80.46(h)(1)(xi) | ASTM D 5599 | 2010 | Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection | ASTM International | |
Coast Guard | 46 CFR 56.01-2(e)(33) | ASTM A 369/A 369M | 1992 | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service | ASTM International | |
Housing and Urban Development Department | 24 CFR 200.949(a)(2) | ISDSI 106 | 1980 | Test Procedures and Acceptance Criteria for Physical Endurance for Prime Painted Steel Surfaces for Steel Doors and Frames | Insulated Steel Door Institute | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (15) | EPA Method 1625 B | 1990 | Semivolatile Organic Compounds by Isotope Dilution GC/MS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (Merphos [Tributyl phosphorotrithioate]) | EPA Method 1657 | 1993 | The Determination of Organo-Phosphorus Pesticides in Municipal and Industrial Wastewater | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 300.915(f)(9) | ASTM D 92 | 1990 | Standard Test Method for Flash and Fire Points by Cleveland Open Cup | ASTM International | |
Environmental Protection Agency | 40 CFR 63, Subpart ZZZZ, Table 4, (1)(a)(ii)(1) | ASTM D 6522 | 2005 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Mine Safety and Health Administration | 30 CFR 56.14130(h) | SAE J-1194 | 1983 | Roll-Over Protective Structures for Wheeled Agricultural Tractors | Society of Automotive Engineers | |
National Telecommunications and Information Administration | 47 CFR 300.1(b) | NTIA Publication | 2011 | NTIA Manual of Regulations and Procedures for Federal Radio Frequency Management | National Telecommunications and Information Administration, U.S. Department of Commerce | |
Occupational Safety and Health Administration | 29 CFR 1910.262(mm) | ASME B&PV Code | 1968 | Code for Unfired Pressure Vessels, Section VIII, Unfired/Pressure Vessels | American Society of Mechanical Engineers | |
Environmental Protection Agency | 40 CFR 147.50(a)(1) | ALUIC regulations | 1989 | Code of Alabama Sections 9-17-1 through 9-17-109 (Cumm. Supp. 1989) | State of Alabama | |
Rural Utilities Service | 7 CFR 1755.405(b)(4) | IEEE 743 | 1984 | Standard Methods and Equipment for Measuring the Transmission Characteristics of Analog Voice Frequency Circuits | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 108.649(d) | IMO Resolution A.760(18) | 1993 | Symbols Related to Life-saving Appliances and Arrangements | International Maritime Organization | |
Energy Department | 10 CFR 431.20(b)(4) | IEEE 112 | 1996 | Test Procedure for Polyphase Induction Motors and Generators | Institute of Electrical and Electronics Engineers | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 178.71(g)(3) | ISO 9809-3 | 2000 | Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 3: Normalized Steel Cylinders | International Organization for Standardization | |
Food and Drug Administration | 21 CFR 178.3770(a)(1) | ASTM D 566 | 1982 | Standard Test Method for Dropping Point of Lubricating Grease | ASTM International | |
Environmental Protection Agency | 40 CFR 141.131(a)(2) | APHA Method 4500-Cl D | 2000 | Chlorine, Amperometric direct | American Public Health Association | |
Coast Guard | 40 CFR 60.261(s) Silvery iron | ASTM A 100 | 1993 | Standard Specification for Ferrosilicon | ASTM International | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.1.5.1 | ASME MFC-4M | 1986 | Measurement of Gas Flow by Turbine Meters | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 160.023-4(a) | MIL-S-18655 | 1971 | Signal, Smoke, and Illumination, Marine, Mark 13, Mod 0 | U.S. Department of Defense | |
Coast Guard | 46 CFR 164.120-7, Table 164.120-7(c)(2)(i) | ASTM D 2471 | 1999 | Standard Test Method for Gel Time and Peak Exothermic Temperature of Reacting Thermosetting Resins | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (30) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 143.4(b) Table (Sulfate) | ASTM D 4327 | 2003 | Inorganic Anions by Ion Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 60.107a(d)(7)(i) | ASTM D 240 | 2002 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Consumer Product Safety Commission | 16 CFR 1505.5(e)(5) | NFPA 70 | 1978 | National Electrical Code | National Fire Protection Association | |
Coast Guard | 46 CFR 160.077-19(c)(18) | UL 1517 | 2012 | Hybrid Personal Flotation Devices | Underwriters Laboratories, Inc. | |
National Highway Traffic Safety Administration | 49 CFR 572.177(a)(2) | NHTSA Publication | 2011 | Procedures for Assembly, Disassembly and Inspection (PADI) of the Hybrid III 10-Year-Old Child Test Dummy (HIII-10C) | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Environmental Protection Agency | 40 CFR 141.25(a) Table Note 5 | APHA Standard Methods, 13th Edition | 1971 | Standard Methods for the Examination of Water and Wastewater. 13th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 58 Appendix E, 12.0(14) | EPA Contract No. 66-02-2515 | 1977 | Lead Analysis for Kansas City and Cincinnati, | U.S. Environmental Protection Agency | |
Mine Safety and Health Administration | 30 CFR 75.333(f) | ASTM E 162 | 1987 | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source | ASTM International | |
National Highway Traffic Safety Administration | 49 CFR 572.41(a)(4) | Drawing No. SA-SID-M050 | 1994 | Lumbar Spine Assembly | Reprographic Technologies | |
Minerals Management Service | 30 CFR 57.5037(a) | ANSI N13.8 | 1973 | Radiation Protection in Uranium Mines | American National Standards Institute | |
Coast Guard | 21 CFR 145.110(a)(1) | AOAC Official Methods | 1980 | Official Methods of Analysis | AOAC International | |
Research and Special Programs Administration | 21 CFR 175.250(b)(1) | ASTM D 938 | 1981 | Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum | ASTM International | |
Environmental Protection Agency | 40 CFR 795.232(c)(2)(i) | ASTM D 1836 | 1983 | Standard Specification for Commercial Hexanes | ASTM International | |
Environmental Protection Agency | 40 CFR 91.509(c) | ASTM E 29 | 1993 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | ASTM International | |
Coast Guard | 46 CFR 58.03-1(f)(2) | ASME B&PV Code | 2000 | Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels with 1999 and 2000 addenda | American Society of Mechanical Engineers | |
Research and Special Programs Administration | 49 CFR 171.7(a)(3) | ASTM A 240/A 240M | 1999 | Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet and Strip for Fusion-Welded Unfired Pressure Vessels | ASTM International | |
Coast Guard | 46 CFR 129.550(a) | ABYC A-3 | 1993 | Recommended Practices and Standards Covering Galley Stoves | American Boat and Yacht Council | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 192.121 | PPI TR-3 | 2004 | Developing Hydrostatic Design Bases, Pressure Design Bases, and Minimum Required Thermoplastic Piping Materials | Plastics Pipe Institute, Inc. | |
Food and Drug Administration | 21 CFR 172.869(b)(9) | Food Chemicals Codex | 1997 | Sucrose Fatty Acid Esters | National Academy Press | |
Public Health Service | 42 CFR 84.141(c) | CGA G-7.1 | 1966 | Commodity Specification for Air | Compressed Gas Association | |
National Highway Traffic Safety Administration | 49 CFR 571.5(l)(29) | SAE J-902 | 1964 | Passenger Car Windshield Defrosting Systems | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (40) | APHA Method 6410 B | 2000 | Base/Neutral and Acid Extractable Compounds by GC/MS | American Public Health Association | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (11) Conductivity | APHA Method 2510 B | 1992 | Conductivity, Laboratory Method | American Public Health Association | |
Environmental Protection Agency | 40 CFR 82, Subpart F, Appendix A, Section 2.1 | ASHRAE 34 | 1992 | Number Designations of Refrigerants | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Coast Guard | 46 CFR 58.10-5(b)(3)(ii) | SAE J-1928 | 1989 | Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications | Society of Automotive Engineers | |
Nuclear Regulatory Commission | 10 CFR 50.55a(b)(2)(vii) | ASME OM Code | 1989 | Code for Operation and Maintenance of Nuclear Power Plants or 1989 Edition, Revision Date or Indicator for ASME/ANSI OM Part 4, ASME/ANSI Parts 6, and 10 must be the OMa-1988 Addenda to the OM-1987 Edition | American Society of Mechanical Engineers |