This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Coast Guard | 46 CFR 160.170-7(b)(3) | ASTM A 653/A 653M | 2008 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (10) | EPA Method 200.5 | 2003 | Determination of Trace Elements in Drinking Water by Axially Viewed Inductively Coupled Plasma-Atomic Emission Spectrometry, Revision 4.2 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (19) Nitrite | APHA Method 4500-NO3 E | 1992 | Nitrate Nitrogen by Selective Electrode | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.17(g)(101) | ASTM D 2584 | 1994 | Standard Test Method for Ignition Loss of Cured Reinforced Resins | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(b)(1) | AFPC Book of Methods | 1991 | Book of Methods Used and Adopted By The Association of Florida Phosphate Chemists, Seventh Edition | Association of Florida Phosphate Chemists | |
National Highway Traffic Safety Administration | 49 CFR 572.143(c)(2) | Drawing No. 9001336 | 1987 | Jam Nut | Reprographic Technologies | |
Food and Drug Administration | 21 CFR 165.110(b)(4)(iii)(F)(15) | EPA Method 547 | 1990 | Determination of Glyphosate in Drinking Water by Direct-Aqueous-Injection HPLC, Post-Column Derivatization and Fluorescence Detection | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 63.14(g)(72) | ASTM D 6323 | 1998 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities | ASTM International | |
Food and Drug Administration | 21 CFR 184.1063(b)(8) | FDA Publication | 1985 | Determination of Lysolecithin Content of Enzyme-Modified Lecithin, Method I | Food and Drug Administration, U.S. Department of Health and Human Services | |
Coast Guard | 46 CFR 160.010-3(a)(9) | IMO LSA Code | 2010 | Life-Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC | APHA Standard Methods, 18th Edition | 1992 | Standard Methods for the Examination of Water and Wastewater, 18th Edition | American Public Health Association | |
Environmental Protection Agency | 40 CFR 449 Appendix A (A)(2) Note | HCC Method 8000 | 1979 | Chemical Oxygen Demand | Hach Chemical Company | |
National Highway Traffic Safety Administration | 49 CFR 572.110(a)(12) | Drawing No. SA-SID-M080 | 1987 | Leg Assembly, Right | Reprographic Technologies | |
Environmental Protection Agency | 40 CFR 98.114(b)(2)(ii) | ASTM D 5373 | 2008 | Standard Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Laboratory Samples of Coal and Coke | ASTM International | |
Coast Guard | 46 CFR 56.01-2(g)(1) | FCI 69-1 | 1977 | Pressure Rating Standard for Steam Traps | Fluids Control Institute | |
Environmental Protection Agency | 40 CFR 60.17(g)(4) | ASTM A 100 | 1974 | Standard Specification for Ferrosilicon | ASTM International | |
Housing and Urban Development Department | 24 CFR 3280.304(b)(1) | HP-SG-96 | 1996 | Structural Design Guide for Hardwood Plywood Wall Panels--HPVA Design Guide | Hardwood Plywood and Veneer Association | |
Food and Drug Administration | 21 CFR 184.1866(b) | Food Chemicals Codex | 1996 | High Fructose Corn Syrup | National Academy Press | |
Federal Railroad Administration | 49 CFR 232.603(a) | AAR S-4240 | 2007 | ECP Brake Equipment—Approval Procedure | Association of American Railroads | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (18) | EPA Method 608 | 1982 | Organochlorine Pesticides & PCBs by GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IG (2-(2,4-Dichlorophenoxy) propionic acid) | EPA Method 515.1 | 1995 | Chlorinated acids Liquid/Liquid and GC/ECD | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 233.70(a)(2) | MIOD regulations | 1983 | The Water Resources Commission Act, MCL 323.1 et seq., reprinted in Michigan 1983 Natural Resources Law | State of Michigan | |
Environmental Protection Agency | 40 CFR 63.1282(a)(2)(ii) | ASTM D 6420 | 2004 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry | ASTM International | |
Architectural and Transportation Barriers Compliance Board | 36 CFR 1191, App D, 409.1 | ASME A17.1 | 2000 | Safety Code for Elevators and Escalators, including ASME A17.1a-2002 Addenda and ASME A17.1b-2003 Addenda | American Society of Mechanical Engineers | |
Coast Guard | 46 CFR 119.440(a)(1) Table 119.440(a)(1) | ASTM B 152 | 1997 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar | ASTM International | |
Food and Drug Administration | 21 CFR 177.1610(a) | ASTM D 1303 | 1979 | Standard Method of Test for Total Chlorine in Vinyl Chloride Polymers and Copolymers | ASTM International | |
Grain Inspection, Packers and Stockyards Administration | 9 CFR 317.309(c)(6) | USDA Handbook 74 | 1973 | Energy Values of Foods: Basis and Derivation | U.S. Department of Agriculture | |
Housing and Urban Development Department | 24 CFR 200.946(a)(2) | EIMA Test Method 101.02 | 1995 | Standard Test Method for Resistance to Water of Exterior Insulation and Finish Systems (EIFS), Class PB (modified ASTM E331-91) | Exterior Insulation Manufacturers Association | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (12) | EPA Method 625 | 1982 | Base/Neutrals and Acids by GC/MS | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.137(c)(2)(ix) Note to paragraph (c)(2)(ix) | ASTM D 1051 | 2008 | Standard Specification for Rubber Insulating Sleeves | ASTM International | |
Minerals Management Service | 30 CFR 250.802(e)(4)(i) | API RP 500 | 2002 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class 1, Division 1 and Division 2 | American Petroleum Institute | |
Small Business Administration | 13 CFR 113.3-3(c) | UFAS | 1991 | Uniform Federal Accessibility Standards | Federal Specifications Standards and Test Methods | |
Federal Motor Carrier Safety Administration | 49 CFR 393.95(j) | UL 912 | 1981 | Highway Emergency Signals | Underwriters Laboratories, Inc. | |
Interior Department | 43 CFR 11.34(b) | DOI NRDAM/GLE | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments, Technical Documentation | U.S. Department of the Interior | |
Housing and Urban Development Department | 24 CFR 3280.604(b)(2) | ANSI A112.14.1 | 1975 | Backflow Valves | American National Standards Institute | |
Energy Department | 10 CFR 431.20(b)(4) | CSA C390 | 1993 | Energy Efficiency Test Methods for Three-Phase Induction Motors, Test Method (1) | Canadian Standards Association | |
Pipeline and Hazardous Materials Safety Administration | 49 CFR 171.7(a)(3) | ISO 6892 | 1984 | Metallic Materials Tensile Testing | International Organization for Standardization | |
Research and Special Programs Administration | 49 CFR 178.358-2(a) | DOE SP–9 | 1968 | Fire Resistant Phenolic Foam, Revision 1 and Supplement | U.S. Department of Energy | |
Environmental Protection Agency | 40 CFR 141.131(d)(2) | ASTM D 6581 | 2000 | Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography | ASTM International | |
Environmental Protection Agency | 40 CFR 63.14(g)(83) | ASTM D 6751 | 2011 | Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels | ASTM International | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | ASHRAE Handbook | 1988 | Equipment | American Society of Heating, Refrigerating and Air Conditioning Engineers | |
Rural Utilities Service | 7 CFR 1755.702(b)(1) | ICEA S-89-648 | 1993 | Standard for Telecommunications Aerial Service Wire, Technical Requirements | Insulated Cable Engineers Association | |
Environmental Protection Agency | 40 CFR 136.3(b)(17)(i) | CEM Publication | 1992 | Closed Vessel Microwave Digestion of Wastewater Samples for Determination of Metals | CEM Corporation | |
Environmental Protection Agency | 40 CFR 75.6(f)(3) | API MPMS | 1988 | Chapter 4, Section 3 | American Petroleum Institute | |
Coast Guard | 46 CFR 160.151-5(d)(1) | IMO Resolution A.657(16) | 1989 | Instructions for Action in Survival Craft | International Maritime Organization | |
Coast Guard | 46 CFR 164.120-5(e)(3) | MIL-R-24719(SH) | 1989 | Military Specification, Resins, Vinyl Ester, Low Pressure Laminating | U.S. Department of Defense | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (26) | EPA Method 200.8 | 1994 | Metals by ICP-MS, Revision 5.4 | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.24(e)(1) | EPA Method 1613 | 1994 | Tetra-through-Octa-Chlorinated Dioxins and Furans by Isotope Dilution HRGC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 60.41da Bituminous coal | ASTM D 388 | 1995 | Standard Classification of Coals by Rank | ASTM International | |
Environmental Protection Agency | 40 CFR 62.16050 Table 3 | ASTM D6784-02 | 2008 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) | ASTM International |