This database provides information on standards that have been cited or incorporated by reference into the US Code of Federal Regulations (CFR). To obtain copies of the standards referenced, information should be provided in the referenced CFR section about how to obtain a copy. Alternatively, individuals can check with the standards publisher, a standards resellers or for a limited number of standards used in regulations, consult the American National Standards Institute (ANSI) Incorporated by Reference (IBR) Portal. This portal provides a mechanism for limited and free access to some of the standards that have been incorporated by reference in the U.S. Code of Federal Regulations (CFR).
Incorporated by (Agency) | FR Citation Sort descending | CFR Citation | Document Number | Document Edition / Year | Title of Standard | Standard Publishing Organization |
---|---|---|---|---|---|---|
Environmental Protection Agency | 40 CFR 435.14 Note 2 | EPA Method 1617 | 2015 | Static Sheen Test | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 75, Appendix D, Section 2.2.5 | ASTM D 4294 | 1998 | Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry | ASTM International | |
Environmental Protection Agency | 40 CFR 80.1451(b)(1)(ii)(T) | ASTM D 975 | 2013 | Standard Specification for Diesel Fuel Oils | ASTM International | |
Food and Drug Administration | 21 CFR 184.1425(b) | Food Chemicals Codex | 1981 | Magnesium Carbonate | National Academy Press | |
Environmental Protection Agency | 40 CFR 147.1751(a)(5) | NDUIC regulations | 1984 | North Dakota Administrative Code Sections 43-02-02-1-01 through 43-02-02-1-18 (North Dakota Geological Survey—Undergound Injection Control Program) | State of North Dakota | |
Environmental Protection Agency | 40 CFR 63.6675 Backup power for renewable | Alaska Statute 42.45.045 | 2015 | Renewable energy grant fund and recommendation program | State of Alaska | |
Rural Utilities Service | 7 CFR 1755.870(g)(7) | ASTM D 1535 | 1989 | Specifying Color by the Munsell System | ASTM International | |
Coast Guard | 46 CFR 128.310(a) | ASTM D 93 | 1997 | Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester | ASTM International | |
Environmental Protection Agency | 40 CFR 435.13 Note 11 | EPA-821-R-11-004 | 2011 | Analytic Methods for the Oil and Gas Extraction Point Source Category | U.S. Environmental Protection Agency | |
Housing and Urban Development Department | 24 CFR 3285.402(c) Table 2 Note 11 | ASTM D 3953 | 1991 | Standard Specification for Strapping, Flat Steel and Seals | ASTM International | |
Food and Drug Administration | 21 CFR 177.1500(d)(5)(i) | ISO 307 | 1984 | Plastics--Polyamides--Determination of Viscosity Number | International Organization for Standardization | |
Coast Guard | 46 CFR 160.176-13(u) | UL 1191 | 1995 | Standard for Components for Personal Flotation Devices | Underwriters Laboratories, Inc. | |
Environmental Protection Agency | 40 CFR 61.18(c)(1) | ANSI N13.1 | 1969 | Guide to Sampling Airborne Radioactive Materials in Nuclear Facilities | American National Standards Institute | |
Environmental Protection Agency | 40 CFR 300.915(c)(8) | ASTM D 1293 | 1990 | Standard Test Method for Pour Point of Petroleum Oils | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.269 Appendix G | IEEE 1048 | 2003 | Guide for Protective Grounding of Power Lines | Institute of Electrical and Electronics Engineers | |
Coast Guard | 46 CFR 110.10-1(g)(8) | IEC 60079-2 | 2001 | Electrical Apparatus for Explosive Gas Atmospheres—Part 2: Pressurized Enclosures “p”, Fourth Edition | International Electrotechnical Commission | |
National Highway Traffic Safety Administration | 49 CFR 572.17(a)(1) | Drawing No. SA 103C 002(B) | 1987 | Title not specified | National Highway Traffic Safety Administration, U.S. Department of Transportation | |
Interior Department | 43 CFR 11.36(b)(4) | DOI NRDAM/GLE | 1999 | CERCLA Type A Natural Resource Damage Assessment Model for Great Lakes Environments, Technical Documentation | U.S. Department of the Interior | |
Environmental Protection Agency | 40 CFR 136.3(a) Table ID (56) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Occupational Safety and Health Administration | 29 CFR 1910.6(g)(2) | ASME B&PV Code | 1968 | Code for Pressure Vessels | American Society of Mechanical Engineers | |
Energy Department | 10 CFR 430 Subpart B, App. B1, 5.3 | AHAM HRF-1 | 1979 | Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers | Association of Home Appliance Manufacturers | |
Nuclear Regulatory Commission | 10 CFR 50.34(f)(3)(v)(A)(1) | ASME B&PV Code | 1980 | Boiler and Pressure Vessel Code, Section III, Division 1 | American Society of Mechanical Engineers | |
Occupational Safety and Health Administration | 29 CFR 1926.602(a)(4) | SAE J-236 | 1971 | Minimum Performance Criteria for Brake Systems for Rubber Tire Self-Propelled Graders | Society of Automotive Engineers | |
Nuclear Regulatory Commission | 10 CFR 73.26(l)(1) | ISO 1496 | 1978 | General Cargo Containers | International Organization for Standardization | |
Occupational Safety and Health Administration | 29 CFR 1926.1433(c)(1)(ii) | SAE J-987 | 2003 | Lattice Boom Cranes—Method of Test | Society of Automotive Engineers | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IC (61) | EPA Method 1613 B | 1997 | Tetra- through Octa-Chlorinated Dioxins and Furans by Isotope Dilution GC/HRMS | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 141.40(a)(3) Table 1 (cobalt) | APHA Method 3125 | 2014 | Metals by Inductively Coupled Plasma/Mass Spectrometry | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60.5401(f)(2) | ASTM D 86 | 1996 | Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure | ASTM International | |
Occupational Safety and Health Administration | 29 CFR 1910.6(e)(26) | ANSI B31.2 | 1968 | Fuel Gas Piping | American National Standards Institute | |
Federal Communications Commission | 47 CFR 80.1101(c)(13)(vi) | IEC 61097-8 | 1998 | Shipborne Watchkeeping Receivers for the Reception of Digital Selective Calling (DSC) in the Maritime MF, MF/HF, and VHF bands | International Electrotechnical Commission | |
Environmental Protection Agency | 40 CFR 141.23(k)(1) Table (17) Nickel | APHA Method 3113 B | 1992 | Metals by Graphite Furnace Atomic Absorption | American Public Health Association | |
Environmental Protection Agency | 40 CFR 60, Appendix B, PS-16, 3.11 | ASTM D 6522 | 2000 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers | ASTM International | |
Federal Railroad Administration | 49 CFR 238 Appendix B (a)(1)(x) | ASTM E 1537 | 1999 | Standard Test Method for Fire Testing of Upholstered Seating Furniture | ASTM International | |
Environmental Protection Agency | 40 CFR 60, Appendix A-7, Method 19, Section 12.5.2.2.3 | ASTM D 240 | 1976 | Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter | ASTM International | |
Coast Guard | 46 CFR 164.018-5(a)(8) | MIL-R-21607D | 1976 | Resins, Polyester, Low Pressure Laminating, Fire-Retardant | U.S. Department of Defense | |
Occupational Safety and Health Administration | 29 CFR 1910.67(b)(1) | ANSI A92.2 | 1969 | Standard for Vehicle Mounted Elevating and Rotating Work Platforms | American National Standards Institute | |
Research and Special Programs Administration | 49 CFR 178.345-2(a) | ASME B&PV Code | 1998 | Boiler and Pressure Vessel Code, Section II | American Society of Mechanical Engineers | |
Rural Utilities Service | 7 CFR 1755.506(a) | 7 CFR 1755.703 | 2012 | Nonmetallic reinforced (NMR) aerial service wire | Rural Utilities Service, U.S. Department of Agriculture | |
Coast Guard | 46 CFR 54.05-5(c)(2) | ASTM E 208 | 1995 | Standard Test Method for Conducting Drop-Weight Test to Determine Ni-Ductility Transition Temperature of Ferric Steels | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(a) Table IB (47) | TJAC Method AES 0029 | 1991 | Direct Current Plasma (DCP) Optical Emission Spectrometric Method for Trace Elemental Analysis of Water and Wastes | Thermo Jarrell Ash Corp. | |
National Highway Traffic Safety Administration | 40 CFR 136.3(a) Table IB (18) | USGS I-1232-85 | 1985 | Chromium, hexavalent chelation/extraction by Flame Atomic Absorption | U.S. Geological Survey | |
Housing and Urban Development Department | 24 CFR 200, Appendix A | FedSpec HH-I-526C | 1968 | Insulation Board, Thermal (Mineral Fiber) | Federal Specifications Standards and Test Methods | |
Coast Guard | 46 CFR 56.01-2(e)(32) | ASTM A 358/A 358M | 1995 | Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service | ASTM International | |
Coast Guard | 33 CFR 96.130(b) | IMO Resolution A.788(19) | 1995 | Guidelines on Implementation of the International Safety Management (ISM) Code by Administrations | International Maritime Organization | |
Coast Guard | 46 CFR 160.151-15(l) | IMO LSA Code | 2010 | Life Saving Appliances, including LSA Code | International Maritime Organization | |
Environmental Protection Agency | 40 CFR 1065.1010(b)(35) | ASTM D 5453 | 2012 | Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence | ASTM International | |
Environmental Protection Agency | 40 CFR 136.3(b)(7)(v)(C) | EPA Method 507 | 1995 | Nitrogen & Phosphorous Pesticides (Drinking Water) | U.S. Environmental Protection Agency | |
Environmental Protection Agency | 40 CFR 444.12(b)(1) Table (10) | EPA Method 283.1 | 1974 | Titanium (Atomic Absorption, Direct Aspiration) | U.S. Environmental Protection Agency | |
Coast Guard | 46 CFR 54.05-5(a) | ASTM E 23 | 1996 | Notched Bar Impact Testing of Metallic Materials | ASTM International | |
Environmental Protection Agency | 40 CFR 98.344(c)(3) | ASME MFC-6M | 1998 | Measurement of Fluid Flow in Pipes Using Vortex Flow Meters | American Society of Mechanical Engineers |