NIST logo

Publications Portal

You searched on:
Topic Area: Nanotechnology
Sorted by: title

Displaying records 361 to 370 of 387 records.
Resort by: Date / Title


361. The evaluation of photo/e-beam complementary grayscale lithography for high topography 3D structure
Topic: Nanotechnology
Published: 3/29/2013
Authors: Liya Yu, Richard J Kasica, Robert Dennis Newby, Lei Chen, Vincent K Luciani
Abstract: This article demonstrates and evaluates photo/e-beam grayscale complementary lithography processes for the fabrication of large area, high topography grayscale structure. The combination of these two techniques capitalizes on the capability of photol ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913677

362. Thermally-Reversible Surface Morphology Transition Between Cylinders and Spheres in Thin Diblock Copolymer Films
Topic: Nanotechnology
Published: 7/28/2010
Authors: Xiaohua Zhang, Kevin G. Yager, Jack F Douglas
Abstract: Many phase transitions exhibit ordering transitions at the boundary of the material that are distinct from the interior where the intermolecular interactions can be significantly different. The present result considers the existence of a reversible s ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902099

363. Thermogravimetric analysis of NIST's single-wall carbon nanotube reference material
Topic: Nanotechnology
Published: 1/25/2011
Authors: Elisabeth Mansfield, Stephanie A Hooker
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907746

364. Thickness dependence of the elastic modulus of tri (8-hydroxyquinolinato) aluminum (III)
Topic: Nanotechnology
Published: 11/2/2010
Authors: Jessica M. Torres, Nathan Bakken, Christopher M Stafford, Jian Li, Vogt D Bryan
Abstract: The intrinsic flexibility of organic molecules has been suggested to enable bendable electronics in comparison to their stiffer, inorganic counterparts. However, very little is known regarding the mechanical properties of these conjugated molecular ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=905662

365. Three dimensional aspects of droplet coalescence during dropwise condensation on superhydrophobic surfaces
Topic: Nanotechnology
Published: 8/24/2011
Authors: Konrad Rykaczewski, John Henry j Scott, Sukumar Rajauria, W Robert Ashurst, Jeff Chinn, Amy Chinn, Wanda Jones
Abstract: We report formation of nano-to-microscale satellite droplets in the geometrical shadow of high contact angle primary drops during dropwise water condensation on a nanostructured superhydrophobic surface. The primary drops contribute to the heat tran ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908846

366. Three steps towards metrological traceability for ballistics signature measurements
Topic: Nanotechnology
Published: 2/1/2010
Authors: Jun-Feng Song, Theodore Vincent Vorburger, Robert Meryln Thompson, Thomas B Renegar, Xiaoyu A Zheng, Li Ma, James H Yen, Martin Ols
Abstract: The National Institute of Standards and Technology (NIST) in collaboration with the Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF) has developed the Standard Reference Material (SRM) 2460 bullets and 2461 casings. NIST and ATF are propos ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901492

367. Three-Magon Splitting and Confluence Processes for Magnetostatic Backward Volume-Spin-Wave Excitations in Yttrium Iron Garnet Films
Topic: Nanotechnology
Published: 4/27/2009
Authors: Pavel Kabos, Cesar Ordonez Ordonez-Romero, Boris A. Kalinikos, Pavol Krivosik, Wei Tong, Carl E. Patton
Abstract: Brillouin light scattering (BLS) has been used to observe and confirm the existence of nonlinear three magnon splitting and confluence processes for propagating spin waves in the magnetostatic backward volume wave (MSBVW) configuration. Wave vector ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901570

368. Through-focus scanning optical microscopy for defect inspection of EUV masks
Topic: Nanotechnology
Published: 8/12/2013
Authors: Ravikiran (Ravikiran) Attota, Vibhu Jindal
Abstract: The TSOM method provides three-dimensional nanoscale metrology using a conventional optical microscope. Substantial improvements in defect detectability using the TSOM method will be presented. The TSOM method shows potential to (i) detect phase defe ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914027

369. Tools and Procedures for Quantitative Microbeam Isotope Ratio Imaging by Secondary Ion Mass Spectrometry
Topic: Nanotechnology
Published: 7/1/2003
Authors: John G Gillen, David S. Bright
Abstract: In this work we demonstrate the use of secondary ion mass spectrometry (SIMS) combined with the Lispix image processing program (Bright 1995) to generate quantitative isotope ratio images from a test sample of a calcium-aluminum rich inclusion (CA ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=831237

370. Tranmission Electron Microscopy with a Liquid Flow Cell
Topic: Nanotechnology
Published: 1/20/2011
Authors: Kate L Klein, Ian M. Anderson, N. de Jonge
Abstract: The imaging of microscopic structures at nanometer-scale spatial resolution in a liquid environment is of interest for a wide range of studies. Transmission electron microscopy (TEM) provides a method for imaging with the requisite spatial resolution ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906875



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series