Take a sneak peek at the new NIST.gov and let us know what you think!
(Please note: some content may not be complete on the beta site.).

View the beta site
NIST logo
Bookmark and Share

MBRAUN LabMaster 130 Glovebox


The glove box is dual-sided and single-length with three glove ports on each side of the box. It measures 1500 mm wide, 1118 mm deep and 914 mm high (59" x 44" x 36"). The full-view windows are made of LEXAN and the gloves are made from Tekaform. One 6-outlet power strip is provided inside the glove box and front-mounted fluorescent lamps are on each side.

The stainless steel cylindrical antechamber for transferring into and out of the glove box measures 390 mm in diameter and 600 m long (15" D, 24" L). Evacuation and refill are software controlled to prevent backfill into the glove box.

Under optimal conditions, less than 1 ppm of water and oxygen are present in the glove box. This is achieved through a single purifier column and a single speed blower controlled through an automatic regeneration program.

Please refer to the owner's manual for further information.

Location: E131

Access Information:

  • The glove box most NOT be used as a fume hood.
  • The glove box is for use by NCNR staff ONLY. If you would like to use the glove box, please contact the listed contact person(s) or your local contact.
MBRAUN LabMaster 130 Glovebox

Name: Juscelino Leao
Phone: (301) 975-8867
Email: juscelino.leao@nist.gov
100 Bureau Dr Stop 6102
Gaithersburg, MD 20899-6102

Any mention of commercial products within NIST web pages is for information only; it does not imply recommendation or endorsement by NIST.

Name: Stacey Cochiara
Phone: (301) 975-8811
Email: stacey.cochiara@nist.gov