Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Benchmarking of Advanced CD-SEMs Against the New Unified Specification for Sub-0.18 Micrometer Lithography

Published

Author(s)

A Deleporte, J Allgair, C Archie, G Banke, Michael T. Postek, J Schlesinger, Andras Vladar, A Yanof

Abstract

The Advanced Metrology Advisory Group (AMAG) comprised of representatives from International SEMATECH consortium member companies and the National Institute of Standards and Technology have joined to develop a new unified specification for an advanced scanning electron microscope critical dimension measurement instrument (CD-SEM). (Allgair, et al., 1998) This paper describes the results of an effort to benchmark six CD-SEM instruments according to this specification. The consensus among the AMAG metrologists was that many critical areas of performance of CD-SEMs required improvement. Following this assessment this specification for benchmarking was developed. The advanced CD-SEM specification addresses several critical areas for improvement, each with its own a separate section. The critical areas covered are: precision, accuracy, charging and contamination, performance matching, pattern recognition and stage navigation accuracy, throughput, and instrumentation outputs. Each section of the specification contains a concise definition of the respective performance parameter, and wherever appropriate refers to ISO definitions. The test methodology is described, complete with the relevant statistical analysis. Many parameters (including precision, matching, and magnification accuracy) are numerically specified to be consistent with the International Technology Roadmap for Semiconductors (ITRS, 1999). Other parameters, such as charging and linewidth accuracy, are targeted with guidelines for improvement. The test wafers developed for determining the level of compliance with the specification are also discussed. The AMAG circulated this report among the metrology instrument suppliers and conferred with them. Certain components of the specification have already been adopted by some of the manufacturers in their newer metrology instruments. International SEMATECH fabricated the AMAG test wafers described herein. Measurements on six state-of-the-art metrology instruments using the AMAG test wafers have been carried out and the results were processed according to this specification. A review of the results is presented in this paper.
Proceedings Title
Proceedings of SPIE
Volume
3998
Conference Dates
February 28, 2000
Conference Location
Santa Clara, CA, USA
Conference Title
Metrology, Inspection, and Process Control for Microlithography XIV, Neal T. Sullivan, Editor

Citation

Deleporte, A. , Allgair, J. , Archie, C. , Banke, G. , Postek, M. , Schlesinger, J. , Vladar, A. and Yanof, A. (2000), Benchmarking of Advanced CD-SEMs Against the New Unified Specification for Sub-0.18 Micrometer Lithography, Proceedings of SPIE, Santa Clara, CA, USA (Accessed March 29, 2024)
Created June 1, 2000, Updated October 12, 2021