NIST logo

Publications Portal

You searched on:
Topic Area: Materials Science
Sorted by: title

Displaying records 321 to 330 of 507 records.
Resort by: Date / Title


321. Nanometrology - FY 2003 Program and Selected Accomplishments
Series: NIST Interagency/Internal Report (NISTIR)
Topic: Materials Science
Published: 12/15/2003
Authors: C M Allocca, Stephen Weil Freiman
Abstract: The emphasis on nanotechnology around the world is leading to the development and commercialization of unique products based upon significantly smaller devices and material ensembles. Materials at the nanoscale in three dimensions (NEMS, MEMS), two ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=850109

322. Nanoparticle Lithography and Imaging Scanning Probe Microscopy
Topic: Materials Science
Published: 10/1/2006
Authors: Jaroslaw Grobelny, De-Hao D. Tsai, Doo-In Kim, Pradeep Narayanan Namboodiri, Robert Francis Cook, Michael Russel Zachariah
Abstract: Scanning tunnelling microscopy (STM) imaging was performed on goldsurfaces with a large coverage of monodispersed silver nanoparticlessoft-landed on the surface from the gas phase. In both ambient and ultra-highvacuum conditions, STM scanning was fou ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=850977

323. Nanoparticle Release from Polymer Nanocomposites Used for Potable Water Infrastructure and Food Packaging: Current Progress & Beyond
Topic: Materials Science
Published: Date unknown
Authors: Andrew Whelton, T.V. Duncan , J.L. Koontz , Tinh Nguyen
Abstract: Nanoparticle (NP) enhanced polymers have the potential to revolutionize food packaging and water pipe performance, though release from these materials has gone relatively unstudied. A literature review was conducted to identify potential NP release p ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908368

324. Nanoparticles in Flame-Retardant Coatings for Flexible Polyurethane Foams: Effects on Flammability and Nanoparticle Release
Topic: Materials Science
Published: 5/15/2013
Authors: Mauro Zammarano, Rick D Davis, Yeon Seok Kim, Richard H. Harris Jr., Marc R. Nyden, Jeffrey W Gilman, Nasir M. Uddin
Abstract: Nanoparticles can effectively reduce polymer flammability; however, the impact of nanoparticles on environmental and health safety is still unclear. The purpose of this study is twofold: (1) to develop and investigate the effect of nanoparticle-rich- ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913190

325. Nanoscale Specific Heat Capacity Measurements Using Optoelectronic Bilayer Microcantilevers
Topic: Materials Science
Published: 12/12/2012
Authors: Brian G. (Brian Gregory) Burke, William A Osborn, Richard Swift Gates, David A LaVan
Abstract: We describe a new technique for optically and electrically detecting and heating bilayer microcantilevers (Pt−SiNx) to high temperatures at fast heating rates for nanoscale specific heat capacity measurements. The bilayer microcantilever acts s ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=912233

326. Non-destructive Measurement of the Residual Stresses in Copper Through-Silicon Vias using Synchrotron Based Micro-beam X-ray Diffraction
Topic: Materials Science
Published: 7/1/2014
Authors: Chukwudi Azubuike Okoro, Lyle E Levine, Yaw S Obeng, Klaus Hummler, Ruqing Xu
Abstract: In this study, we report a new method for achieving depth resolved determination of the full stress tensor in buried Cu through-silicon vias (TSVs), using synchrotron based X-ray micro-diffraction technique. Two adjacent Cu TSVs were analyzed; on ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915348

327. Non-rigid and tough calcium phosphate cement scaffold seeded with umbilical cord stem cell for bone repair
Topic: Materials Science
Published: 8/1/2013
Authors: Carl George Simon Jr, Hockin H. K. Xu, Michael D Weir, WahWah Thein-Han
Abstract: Human umbilical cord mesenchymal stem cells (hUCMSCs) are a promising alternative to bone marrow MSCs, which require invasive procedures to harvest. The objectives of this study were to develop a novel non-rigid and tough calcium phosphate cement (CP ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907572

328. ON LINE MONITORING SYSTEM - AN APPLICATION FOR MONITORING KEY WELDING PARAMETERS OF DIFFERENT WELDING PROCESSES
Topic: Materials Science
Published: 11/16/2007
Authors: Thomas Allen Siewert, Ivan Samard¿i¿,, Zvonimir Kolumbi
Abstract: This paper describes the application of an on-line monitoring system for the monitoring, aquisition and processing of key welding parameters. The on-line monitoring system has been successfully applied in practice to measure key welding parameters fo ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=50624

329. Obstacle Detection and Avoidance from an Automated Guided Vehicle
Topic: Materials Science
Published: 9/18/2014
Authors: Roger V Bostelman, William P Shackleford, Geraldine S Cheok
Abstract: Current automated guided vehicle (AGV) technology typically provides material handling flow along single or dual opposing-flow lanes in manufacturing and distribution facilities. An AGV stops for most any obstacle that may be in its path which then ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915448

330. Optimization of Imaging Polymer Based Scaffolds Using X-Ray Microcomputed Tomography
Topic: Materials Science
Published: 5/15/2012
Authors: David E, Morris, Melissa L Mather, Carl George Simon Jr, John A Crowe
Abstract: The performance of polymer based scaffolds used in regenerative medicine is linked to their structural properties and as such strategies for structural characterization of scaffolds have been developed. X-ray microscopic computed tomography (X-ray ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906393



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series