NIST logo

Publications Portal

You searched on: Topic Area: Metals Sorted by: title

Displaying records 11 to 20 of 42 records.
Resort by: Date / Title


11. Curved-Wide-Plate Test Protocol and Results
Topic: Metals
Published: 1/25/2012
Author: Timothy S Weeks
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909776

12. Economic impact of applying high strength steels in hydrogen gas pipelines
Topic: Metals
Published: 6/17/2015
Authors: Jeffrey W Sowards, James R Fekete, Robert L Amaro
Abstract: Pipeline steel will likely be employed extensively to transport gaseous hydrogen in support of a future clean energy economy. To date, a hydrogen-specific cost analysis of pipeline installation has not been produced. This paper performs several cos ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=917625

13. Effect of oxidation on surface-enhanced Raman scattering activity of silver nanoparticles: a quantitative correlation
Topic: Metals
Published: 6/6/2011
Authors: Yun Han, Robert Lupitskyy, Tseng-Ming Chou, Christopher M Stafford, Henry Du, Svetlana Sukhishvili
Abstract: The effect of silver oxidation on surface-enhanced Raman scattering (SERS) was investigated using citrate-reduced silver nanoparticles (Ag NPs) (45-50 nm in diameter) immobilized on glass substrate. Oxidation of Ag NPs was performed in controlled ozo ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906745

14. Effects of barrier composition and electroplating chemistry on adhesion and voiding in copper/dielectric diffusion barrier films
Topic: Metals
Published: 8/15/2011
Authors: Ryan Paul Birringer, Roey Shaviv, Roy H. Geiss, David Thomas Read, Reinhold Dauskardt
Abstract: The effects of electroplating chemistry and dielectric diffusion barrier composition on Cu voiding and barrier adhesion are reported. Adhesion was quantified using the four-point bend thin film adhesion technique, and voiding in the Cu films was q ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908224

15. Elastic-Plastic Fracture Toughness Tests on X100 Pipeline Steel Using Specimens of Different Configurations
Topic: Metals
Published: 8/1/2011
Authors: Enrico Lucon, Timothy S Weeks, D. Y. Park, James Gianetto, G Shen, R S Eagleson
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909626

16. Electron Transport in Gold Nanowires: Stable 1-, 2- and 3-Dimensional Atomic Structures and Non-Integer Conduction States
Topic: Metals
Published: 9/14/2011
Authors: Francesca M Tavazza, Douglas T Smith, Lyle E Levine, Jon Robert Pratt, Anne M. Chaka
Abstract: Experimental conductivity measurements made during highly stable tensile deformation of Au nanowires show a rich variety of behaviors, including non-integer quantum conductance plateaus, transitions and slopes. Using tight binding conductance cal ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906808

17. Estimation of Process Stability in the MAG Welding Process by Monitoring the Welding Parameters
Topic: Metals
Published: 11/1/2001
Author: Thomas A. (Thomas A.) Siewert
Abstract: This paper presents the distribution of the main welding parameters (welding voltage and welding current) for semiautomatic arc welding with the metal active gas (MAG) process, using both flux- cored and solid electrodes. Two different shielding fas ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851229

18. Fatigue Flaw NDE Reference Standard Development - Phase I Feasibility Study
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7902
Topic: Metals
Published: 11/1/2012
Authors: Mark D. Richards, Joseph David McColskey, Timothy S Weeks
Abstract: A feasibility study was performed to evaluate a novel method of accurately fatigue cracking steel plates to generate fatigue proposed fatigue crack reference standards. Fatigue cracks were introduced into low carbon steel reference plates in whi ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910315

19. Fracture Toughness through a Welded Pipeline Section - Crack Tip Opening Angle Criterion
Topic: Metals
Published: 4/23/2007
Authors: Philippe P. Darcis, Christopher N McCowan, Elizabeth S Drexler, Joseph David McColskey, Avigdor Shtechman, Thomas A. (Thomas A.) Siewert
Abstract: The increasing demand for natural gas as an alternative energy source implies continued growth of gas pipeline installations. This trend compels the natural gas transmission industry to consider the construction of larger-diameter, higher-pressure pi ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=50531

20. From the bottom up ‹ measuring bulk mechanical properties via microtechnology
Topic: Metals
Published: 6/10/2010
Authors: Nicholas Barbosa, Sudook A. Kim, David Thomas Read
Abstract: The micromechanics community has developed a large set of tools for measuring the properties of micro- and nano-scaled materials. These new tools have been successfully applied to a range of materials, most often in thin-film form, to determine the c ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=904137



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series