NIST logo

Publications Portal

You searched on: Topic Area: Advanced Materials

Displaying records 61 to 70 of 74 records.
Resort by: Date / Title


61. Combinatorial Screening of Hydrogels for 3-D Cell Culture: Osteoblasts in Stiffness Gradients Yield Graded Tissues
Topic: Advanced Materials
Published: 7/1/2010
Authors: Kaushik Chatterjee, Sheng Lin-Gibson, William E Wallace III, Marian F Young, Carl George Simon Jr.
Abstract: A combinatorial library approach was used to demonstrate that hydrogel scaffold modulus can enhance osteoblast differentiation driving formation of a 3-D graded tissue construct. Though many previous studies have focused on screening cell-material i ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902328

62. Multi-Scale Pore Morphology in Vapor-Deposited Yttria-Stabilized Zirconia Coatings
Topic: Advanced Materials
Published: 6/16/2010
Authors: Derek D. Hass, H. Zhao, Tabbetha A. Dobbins, Andrew John Allen, Andrew J Slifka, H. N.G. Wadley
Abstract: A high pressure, electron-beam directed-vapor deposition process has been used to deposit partially stabilized zirconia containing 7 % yttria by mass at deposition pressures of 7.5 Pa to 23 Pa. Anisotropic ultra-small-angle X-ray scattering (USAXS) w ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=903655

63. Challenges and Opportunities of Organic Electronics
Topic: Advanced Materials
Published: 4/2/2010
Author: Calvin Chan
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=905387

64. Organic Electronics: Challenges and Opportunities
Topic: Advanced Materials
Published: 3/31/2010
Author: Calvin Chan
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=905389

65. Measuring the viscoelastic properties of confined polymer films by thermal wrinkling
Topic: Advanced Materials
Published: 3/21/2010
Authors: Edwin P Chan, Kirt A. Page, Christopher M Stafford
Abstract: We demonstrate that thermal wrinkling can be utilized to measure the rubbery modulus and shear viscosity of polystyrene (PS) thin films as a function of temperature. Specifically, we use surface laser-light scattering (SLS) to characterize the wrinkl ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=904142

66. Spray Deposited Poly-3-hexylthiophene Thin Film Transistors
Topic: Advanced Materials
Published: 12/11/2009
Authors: Calvin Chan, Lee J Richter, David Germack, Brad Conrad, Daniel A Fischer, Dean M DeLongchamp, David J Gundlach
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=905385

67. Generation of Monolayer Gradients in Surface Energy and Chemistry for Block Copolymer Thin Film Studies
Topic: Advanced Materials
Published: 12/1/2009
Authors: Julie N. L. Albert, Michael J. Baney, Christopher M Stafford, Jennifer Y. Kelly, Thomas H Epps
Abstract: We utilize an innovative vapor deposition set-up and cross-diffusion of functionalized chlorosilanes under dynamic vacuum to generate a linear gradient in surface energy and composition on a silicon substrate. The gradient can be tuned by manipulati ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902680

68. Inter-Laboratory Comparisons of NbTi Critical Current Measurements
Topic: Advanced Materials
Published: 6/22/2009
Authors: Arno Godeke, D. Turrioni, T. Boutboul, Najib Cheggour, A. K. Ghosh, Loren Frederick Goodrich, M Meinesz, A. den Ouden
Abstract: We report on a multi-institute comparison of critical current data, measured on a modern Large Hadron Collider (LHC) NbTi wire that has shown a standard deviation below 1% in critical current density spread in more than 1500 measurements. Inter-labor ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=900166

69. Internal tin Nb3Sn conductors engineered for fusion and particle accelerator applications
Topic: Advanced Materials
Published: 6/22/2009
Authors: Jeffrey Parrell, Y. Zhang, Michael Field, M Meinesz, Yonghua Huang, H Miao, Seungok Hong, Najib Cheggour, Loren Frederick Goodrich
Abstract: The critical current density (Jc) of Nb3Sn strand has been significantly improved over the last several years. For most magnet applications, high Jc internal tin has displaced bronze process strand. The highest Jc values are obtained from distributed ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=900165

70. Test Results of the First US ITER TF Conductor in SULTAN
Topic: Advanced Materials
Published: 6/22/2009
Authors: Nicolai N. Martovetsky, Daniel R. Hatfield, John R. Miller, Chen-yu Gung, Joel S. Schultz, Najib Cheggour, Loren Frederick Goodrich, Pierluigi Bruzzone, Boris Stepanov, Rainer Wesche, Bernd Seeber
Abstract: The US Domestic Agency is one of six parties supplying TF cable-in-conduit conductors (CICCs) for ITER. Previous tests have shown that measured performance of the TF CICCs can be much lower than expected from the strand properties at the projected un ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=900251



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series