NIST logo

Publications Portal

You searched on: Topic Area: Systems Integration Sorted by: date

Displaying records 1 to 10 of 37 records.
Resort by: Date / Title


1. OAGi/NIST Workshop on Open Cloud Architecture for Smart Manufacturing
Series: Technical Note (NIST TN)
Topic: Systems Integration
Published: 4/20/2016
Authors: Nenad Ivezic, Boonserm Kulvatunyou, Yan Lu, Yunsu Lee, Jaehun Lee, Albert W Jones, Simon Paul Frechette
Abstract: This report summarizes the results from the OAGi/NIST Workshop on Open Cloud Architecture for Smart Manufacturing, which was held at the National Institute of Standards and Technology on May 5, 2015. The workshop was a forum for manufacturers and pr ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=920357

2. Smart Manufacturing Standards Landscape
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 8107
Topic: Systems Integration
Published: 2/23/2016
Authors: Yan Lu, Katherine C Morris, Simon Paul Frechette
Abstract: The future of manufacturing lies in being able to optimize the use of resources to produce high quality product and adapt quickly to changing conditions. From smaller lot sizes, to more customization, to sudden changes in supply chain; the variab ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=919492

3. A "Smart Component" Data Model in PLM
Topic: Systems Integration
Published: 10/29/2015
Authors: Yunpeng Li, Utpal Roy, Seungjun Shin, Yung-Tsun Tina Lee
Abstract: Today's physical products are becoming smarter not only because of their increasingly complex functionalities, but also for their superior capabilities of adaptation to dynamic working environment based on embedded software and real-time informat ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=919024

4. Enabling Smart Manufacturing Research and Development using a Product Lifecycle Test Bed
Topic: Systems Integration
Published: 10/17/2015
Authors: Moneer M Helu, Thomas D Hedberg
Abstract: Smart manufacturing technologies require a cyber-physical infrastructure to collect and analyze data and information across the manufacturing enterprise. This paper describes the design of a product lifecycle test bed concept built on a cyber-physica ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=919941

5. Standards Landscape and Directions for Smart Manufacturing Systems
Topic: Systems Integration
Published: 8/24/2015
Authors: Yan Lu, Katherine C Morris, Simon Paul Frechette
Abstract: The future of manufacturing lies in being able to adapt quickly to changing conditions. From smaller lot sizes, to more customization, to sudden changes in supply chain, the variability that manufacturers face is rapidly increasing. The key to e ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=918723

6. TOWARDS AN INTEGRATED DATA SCHEMA DESIGN FOR ADDITIVE MANUFACTURING: CONCEPTUAL MODELING
Topic: Systems Integration
Published: 8/12/2015
Authors: Yan Lu, Sangsu Choi, Paul W Witherell
Abstract: Large amounts of data are generated, exchanged, and used during an additive manufacturing (AM) build. While the AM data from a single build is essential for establishing part traceability, when methodically collected, the full processing history ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=918022

7. Enabling Smart Manufacturing Research and Development using a Product Lifecycle Test Bed
Topic: Systems Integration
Published: 6/8/2015
Authors: Moneer M Helu, Thomas D Hedberg
Abstract: Smart manufacturing technologies require a cyber-physical infrastructure to collect and analyze data and information across the manufacturing enterprise. This paper describes the design of a product lifecycle test bed concept built on a cyber-phy ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=917586

8. Streamlining the Additive Manufacturing Digital Spectrum: A Systems Approach
Topic: Systems Integration
Published: 1/1/2015
Author: Paul W Witherell
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=917652

9. Toward Metamodels for Composable and Reusable Additive Manufacturing Process Models
Topic: Systems Integration
Published: 11/13/2014
Authors: Paul W Witherell, Shaw C Feng
Abstract: In this paper, we advocate for a more harmonized approach to model development for additive manufacturing (AM) processes, through classification and metamodeling that will support AM process model composability, reusability, and integration. We rev ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=917258

10. Feasibility of Integrating OAGIS and BPMN
Topic: Systems Integration
Published: 10/22/2014
Authors: Denis Gagne, Conrad E Bock
Abstract: Engineering and enterprise processes overlap in their concerns, for example, coordinating product design and customer relations. Integration of these processes provides more efficient communication and higher quality results than leaving them separat ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=916500



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series