NIST logo

Publications Portal

You searched on:
Topic Area: Chemical Engineering
Processing
Sorted by: title

Displaying records 1 to 10 of 104 records.
Resort by: Date / Title


1. A Fluorine Bomb Calorimetric Determination of the Standard Molar Enthalpy of Formation of Silicon Disulfide SiS^d2^cr) at the temperature 298.15 K. Enthalpies of Dissociation of Si-S Bonds
Topic: Chemical Engineering & Processing
Published: 9/1/1997
Authors: I. Tomaszkiewicz, G A Hope, P A O'Hare
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=100467

2. A Humidity Generator for Temperatures to 200 °C and Pressures to 1.6 MPa
Topic: Chemical Engineering & Processing
Published: 11/30/2012
Authors: D Vega-Maza, W Wyatt Miller, Dean C Ripple, Gregory E Scace
Abstract: We have constructed a new humidity generator that produces gas streams of known moisture content at temperatures from 85 °C to 200 °C, absolute pressures from 0.2 MPa to 1.6 MPa, and relative humidities from 10 % to 90 %. The generator produces a moi ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=905234

3. A Molecular Dynamics Study of a Reversed-Phased Liquid Chromatography Model
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 6222
Topic: Chemical Engineering & Processing
Published: 9/1/1998
Authors: J T. Slusher, Raymond Dale Mountain
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902011

4. A Non-Linear Regression Analysis for Estimating Low Temperature Vapor Pressures and Enthalpies of Vaporization
Topic: Chemical Engineering & Processing
Published: 12/1/1996
Author: R Tillner-Roth
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=100466

5. A Reference Standard for Measuring Humidity of Air Using a Re-entrant Radio Frequency Resonator
Topic: Chemical Engineering & Processing
Published: 5/2/2006
Authors: Peter H Huang, Dean C Ripple, Michael R Moldover, Gregory E Scace
Abstract: We developed a stable reference hygrometer suitable for operation at temperatures above ambient that has a robust design, inherent stability, and a well-understood theory of measurement. This hygrometer uses a reentrant, radio-frequency, cavity reson ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902995

6. Accurate Flow Measurement in Vacuum Processing
Topic: Chemical Engineering & Processing
Published: 12/1/1996
Author: S A Tison
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=100333

7. An Automated Apparatus for Measuring Sound Speeds in Hazardous Gases
Topic: Chemical Engineering & Processing
Published: 5/1/1998
Author: John J. Hurly
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901951

8. An Equation of State for the Thermodynamic Properties of R143a (1,1,1-Trifluoroethane)
Topic: Chemical Engineering & Processing
Published: 11/1/1997
Authors: Stephanie L Outcalt, Mark O McLinden
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901986

9. An in situ Rheometric Shearing Apparatus for SANS
Topic: Chemical Engineering & Processing
Published: 1/1/1998
Authors: G C. Straty, Chris D Muzny, B D. Butler, M Y Lin, T Slawecki, Charles J. Glinka, Howard J. Hanley
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902016

10. Bilateral Comparison Confirms NIM‰s and NIST‰s Gas Flow Capabilities
Topic: Chemical Engineering & Processing
Published: 10/15/2010
Authors: Aaron N Johnson, CHUNHUI LI
Abstract: The bilateral comparison between NIM and NIST for gas flow was conducted from June 2008 to October 2009. Two critical flow venturis (CFVs) with nominal throat diameters of 10 mm and 20 mm, respectively, were selected as transfer standards. The CFVs w ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906063



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series