NIST logo

Publications Portal

You searched on: Topic Area: Building Materials Sorted by: date

Displaying records 11 to 20 of 25 records.
Resort by: Date / Title


11. Alkali-Silica Reaction Degradation of Nuclear Power Plant Concrete Structures: A Scoping Study
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7937
Topic: Building Materials
Published: 3/11/2013
Authors: Kenneth Alan Snyder, Hai Sang Lew
Abstract: Alkali-silica reaction (ASR) is a concrete degradation phenomenon in which the alkalis that are typically found in concrete react with certain amorphous or micro-crystalline siliceous phases in the aggregate and, in the presence of moisture, form ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913633

12. Flexible polyurethane foam with well characterized and reproducible smoldering
Topic: Building Materials
Published: 3/24/2012
Authors: Mauro Zammarano, Szabolcs Matko, Rick D Davis, Roland H. Kraemer
Abstract: Smoldering is a self-sustaining heterogeneous oxidation reaction that induces a slow, low temperature, flameless combustion.1 Flexible polyurethane foams (PUF) are particularly prone to smoldering due to their high air permeability and low density. I ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909925

13. Measurement Science Roadmap for Workability of Cementitious Materials: Workshop Summary Report
Series: Technical Note (NIST TN)
Report Number: 1704
Topic: Building Materials
Published: 8/15/2011
Authors: Chiara F Ferraris, Nicos Martys
Abstract: This report summarizes the results of the workshop ,Measurement Science Roadmap for Workability of Cementitious MaterialsŠ held on March 18, 2011 in Gaithersburg Maryland and sponsored by the National Institute of Standards and Technology with collab ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908815

14. Rheological Characterization of Flow Table Reference Material
Topic: Building Materials
Published: 4/29/2011
Authors: Chiara F Ferraris, Haleh Azari
Abstract: The flow table is a standardized test that is widely used to qualify a mortar to be tested for compressive strength and air content. It is also the only standard test to quantify a mortar workability property. Therefore, the calibration of this dev ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906848

15. The Role of Service Life Prediction In Sustainability Determinations
Topic: Building Materials
Published: 2/14/2011
Authors: Christopher C White, Kar T. Tan, Donald Lee Hunston
Abstract: Sustainability calculations are based on assumptions about the energy required to produce, transport place in-service items. A critical component of these calculations is the expected service life of the material, component or system. Estimates of t ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907521

16. PERFORMANCE ASSESSMENTS INSIGHTS ON THE USE OF CEMENTS IN WASTE MANAGEMENT
Topic: Building Materials
Published: 11/7/2010
Authors: David W. Esh, Jacob Philip, Kenneth Alan Snyder
Abstract: The use of cementitious materials has been proposed in a variety of waste management systems because these materials can have a variety of desirable performance characteristics: hydraulic isolation, chemical isolation, structural stability. Cementit ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906913

17. Roles of Adhesive and Interfacial Properties on Humidity-induced Failure
Topic: Building Materials
Published: 2/21/2010
Authors: Kar T. Tan, Christopher C White, Donald Lee Hunston, Kristen L Steffens, Hatlee Timothy, Kristen Hamilton, Vogt D Bryan
Abstract: Adhesion loss due to moisture is a fundamental problem in a large diversity of industries ranging from microelectronics and automotive to aerospace. This study investigates the durability of model adhesive joints consisting of a homologous series of ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=904700

18. HYDRATED PHASES IN BLENDED CEMENTITIOUS SYSTEMS FOR NUCLEAR INFRASTRUCTURE
Topic: Building Materials
Published: 10/15/2009
Authors: Kenneth Alan Snyder, Paul E Stutzman, Jacob Philip, David W. Esh
Abstract: The hydration products of varying proportions of portland cement, fly ash, ground granulated blast furnace slag, and silica fume in blended systems were identified and quantified. The proportion of portland cement varied from 100 % down to 10 %. ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902278

19. Mapping Heterogeneity in NanoTiO2/Polymer Coatings Using Confocal Microscopy and Depth Sensing Indentation
Topic: Building Materials
Published: 10/14/2009
Author: Li Piin Sung
Abstract: The purpose of this study is to develop relevant metrology to measure the appropriate structure-property relationship at a proper length scale to understand the interplay between nanoparticle and polymeric matrix. In this paper, we present the prelim ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=904088

20. Effect of Nano-Silica Fillers on Surface Morphology and Mechanical Properties of Polymer-Silica Composites
Topic: Building Materials
Published: 8/20/2009
Authors: Li Piin Sung, Dongmei Zhe, Aaron M Forster, Peter Krommenhoek, Nancy J Lin, Sheng Lin-Gibson
Abstract: Investigation on the effect of nano-silica on the effect of nano-silica on the surface morphology and mechanical properties has been carried out on two-dimensional (2D) gradient polymer-silica composite samples varied in chemical composition (e.g., f ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902248



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series