Take a sneak peek at the new NIST.gov and let us know what you think!
(Please note: some content may not be complete on the beta site.).

View the beta site
NIST logo

Publications Portal

You searched on: Topic Area: Systems Integration

Displaying records 1 to 10 of 41 records.
Resort by: Date / Title


1. Integrating Top-down and Bottom-up Cybersecurity Guidance Using XML
Topic: Systems Integration
Published: 8/11/2016
Author: Joshua Lubell
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=921518

2. Integrating Top-down and Bottom-up Cybersecurity Guidance using XML
Topic: Systems Integration
Published: 8/1/2016
Author: Joshua Lubell
Abstract: This paper describes a markup-based approach for synthesizing disparate information sources, and then discusses a software implementation of the approach. The implementation, developed using XForms and Extensible Stylesheet Language Transformatio ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=921091

3. Identified research directions for using manufacturing knowledge earlier in the product life cycle
Topic: Systems Integration
Published: 7/22/2016
Authors: Thomas D Hedberg, Nathan W. Hartman, Phil Rosche, Kevin Fischer
Abstract: The fundamental study of Design for Manufacturing (DFM), and the use of manufacturing knowledge to support design decisions, has received attention in the academic domain. However, little industry practice has been studied to provide solutions that a ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=919582

4. OAGi/NIST Workshop on Open Cloud Architecture for Smart Manufacturing
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 8124
Topic: Systems Integration
Published: 4/20/2016
Authors: Nenad Ivezic, Boonserm Kulvatunyou, Yan Lu, Yunsu Lee, Jaehun Lee, Albert W Jones, Simon Paul Frechette
Abstract: This report summarizes the results from the OAGi/NIST Workshop on Open Cloud Architecture for Smart Manufacturing, which was held at the National Institute of Standards and Technology on May 5, 2015. The workshop was a forum for manufacturers an ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=920357

5. Current Standards Landscape for Smart Manufacturing Systems
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 8107
Topic: Systems Integration
Published: 2/23/2016
Authors: Yan Lu, Katherine C Morris, Simon Paul Frechette
Abstract: The future of manufacturing lies in being able to optimize the use of resources to produce high quality product and adapt quickly to changing conditions. From smaller lot sizes, to more customization, to sudden changes in supply chain; the variab ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=919492

6. A "Smart Component" Data Model in PLM
Topic: Systems Integration
Published: 10/29/2015
Authors: Yunpeng Li, Utpal Roy, Seungjun Shin, Yung-Tsun Tina Lee
Abstract: Today's physical products are becoming smarter not only because of their increasingly complex functionalities, but also for their superior capabilities of adaptation to dynamic working environment based on embedded software and real-time informat ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=919024

7. Enabling Smart Manufacturing Research and Development using a Product Lifecycle Test Bed
Topic: Systems Integration
Published: 10/17/2015
Authors: Moneer M Helu, Thomas D Hedberg
Abstract: Smart manufacturing technologies require a cyber-physical infrastructure to collect and analyze data and information across the manufacturing enterprise. This paper describes the design of a product lifecycle test bed concept built on a cyber-physica ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=919941

8. Standards Landscape and Directions for Smart Manufacturing Systems
Topic: Systems Integration
Published: 8/24/2015
Authors: Yan Lu, Katherine C Morris, Simon Paul Frechette
Abstract: The future of manufacturing lies in being able to adapt quickly to changing conditions. From smaller lot sizes, to more customization, to sudden changes in supply chain, the variability that manufacturers face is rapidly increasing. The key to e ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=918723

9. TOWARDS AN INTEGRATED DATA SCHEMA DESIGN FOR ADDITIVE MANUFACTURING: CONCEPTUAL MODELING
Topic: Systems Integration
Published: 8/12/2015
Authors: Yan Lu, Sangsu Choi, Paul W Witherell
Abstract: Large amounts of data are generated, exchanged, and used during an additive manufacturing (AM) build. While the AM data from a single build is essential for establishing part traceability, when methodically collected, the full processing history ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=918022

10. Enabling Smart Manufacturing Research and Development using a Product Lifecycle Test Bed
Topic: Systems Integration
Published: 6/8/2015
Authors: Moneer M Helu, Thomas D Hedberg
Abstract: Smart manufacturing technologies require a cyber-physical infrastructure to collect and analyze data and information across the manufacturing enterprise. This paper describes the design of a product lifecycle test bed concept built on a cyber-phy ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=917586



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series