NIST logo

Publications Portal

You searched on:
Author: William Boettinger

Displaying records 1 to 10 of 58 records.
Resort by: Date / Title


1. A diffuse-interface Model of Reactive Wetting with Intermetallic Formation
Published: 5/1/2012
Authors: Walter Villaneuva, William J Boettinger, Geoffrey B McFadden, James A Warren
Abstract: A diffuse-interface model of reactive wetting with intermetallic formation is developed that incorporates fluid flow, phase change, and solute diffusion. The model is based on the total molar Gibbs energy of a ternary system with four phases. Numeric ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910117

2. Bending of a Bimetallic Beam due to the Kirkendall Effect
Published: 1/1/2010
Authors: William J Boettinger, Geoffrey B McFadden
Abstract: The time dependent bending of single phase and two phase bimetal strips due to interdiffusion is computed. The model couples simple beam theory and diffusion, the bending being due to the creation and /annihilation of vacancies necessitated by unequa ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=902071

3. The Pre-Wetting Transition at Anti-Phase Boundaries: An Atomistic Modeling Study of Ni(sub 3)Al
Published: 6/11/2008
Authors: Chandler A Becker, Yuri Mishin, William J Boettinger
Abstract: Using an embedded-atom model for NiAl alloys, we have examined interfacial properties of the Ni/Ni(sub3)Al system, concentrating on properties of the anti-phase boundaries. These interfaces between gamma prime phases can undergo a pre-wetting transi ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=853507

4. Recommended Practice Guide: DTA and Heat-Flux DSC Measurements of Alloy Melting and Freezing
Series: Special Publication (NIST SP)
Report Number: 960-15
Published: 11/1/2006
Authors: William J Boettinger, Ursula R Kattner, Kil Won Moon, John Perepezko
Abstract: This document is focused on differential thermal analysis (DTA) and heat-flux differential scanning calorimetry (HF-DSC) of metals and alloys. A thermal analysis guide focused only on metals and alloys is appropriate because they behave quite differ ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=853443

5. Numerical Modeling of Diffusion-Induced Deformation
Published: 9/11/2006
Authors: J A Dantzig, William J Boettinger, James A Warren, Geoffrey B McFadden, Sam Ray Coriell, R F Sekerka
Abstract: We present a numerical approach to modeling the deformation induced the the Kirkendall effect in binary alloys. The governing equations for isothermal binary diffusion are formulated with respect to inert markers and also with respect to the volume ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=853426

6. Whisker Formation in Pb-Free Surface Finishes
Published: 9/11/2006
Authors: Gery R Stafford, Maureen E Williams, C E Johnson, Kil Won Moon, Ugo Bertocci, William J Boettinger
Abstract: High purity bright Sn, Sn-Cu and Sn-Pb layers measuring 3,7 and 16 microns thick were electrodeposited onto phosphor bronze cantilever beams in a rotating disk apparatus. Beam deflection measurements within 15 min. of plating proved that all electro ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=853417

7. Microstructural Characterization of Al-7075 T651 Chips and Work Pieces Produced by High Speed Machining
Published: 8/11/2006
Authors: Carelyn E Campbell, Leonid A Bendersky, William J Boettinger
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901751

8. NIST Recommended Practice Guide: DTA and Heat-Flux DSC Measurements of Alloy Melting and Freezing
Published: 4/30/2006
Authors: William J Boettinger, Ursula R Kattner, Kil Won Moon, John Perepezko
Abstract: This document is focused on differential thermal analysis (DTA) and heat-flux differential scanning calorimetry (HF-DSC) of metals and alloys. A thermal analysis guide focused only on metals and alloys is appropriate because they behave quite differ ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901091

9. Whisker & Hillock Formation on Sn, Sn-Cu and Sn-Pb Electrodeposits
Published: 11/11/2005
Authors: William J Boettinger, C E Johnson, Leonid A Bendersky, Kil Won Moon, Maureen E Williams, Gery R Stafford
Abstract: Bright Sn, Sn-Cu and Sn-Pb layers, 3, 7 and 16 mm thick were electrodeposited on phosphor bronze cantilever beams in a rotating disk apparatus. Over a period of several days, Sn-Cu deposits develop 50 mm contorted hillocks and 200 mm whiskers, pure ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=853388

10. Lateral Deformation of Diffusion Couples
Published: 10/1/2005
Authors: William J Boettinger, Geoffrey B McFadden, Sam Ray Coriell, R F Sekerka, James A Warren
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=150077



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series