NIST logo

Publications Portal

You searched on:
Author: Bryon Faust

Displaying records 1 to 10 of 11 records.
Resort by: Date / Title


1. Measuring Step Gauges Using the NIST M48 CMM
Published: 4/1/2011
Authors: John Richard Stoup, Bryon S. Faust
Abstract: The Moore M48 coordinate measuring machine (CMM) has provided NIST with flexible measurement capabilities for many years. The machine‰s state of the art performance was further improved following the move of the machine into the new Advanced Measurem ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907992

2. Measuring Step Gauges Using the NIST M48 CMM
Published: 7/25/2010
Authors: John Richard Stoup, Bryon S. Faust
Abstract: The Moore M48 coordinate measuring machine (CMM) has provided NIST with unique and very flexible measurement capabilities for many years. The machine‰s state of the art performance was further improved following the move of the machine into the new A ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=905761

3. Early Results From the NIST M48 CMM in the New AML Facility
Published: 3/3/2006
Authors: John Richard Stoup, Bryon S. Faust, Theodore D Doiron
Abstract: The Advanced Measurement Laboratory at NIST in Gaithersburg has already provided real, measurable improvement in some dimensional metrology measurement processes at NIST, most notably in the performance of the NIST Moore M48 coordinate measuring mach ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823198

4. New Capabilities At NIST In Dimensional Metrology
Published: 1/1/2005
Authors: Theodore D Doiron, Eric S Stanfield, Bryon S. Faust, John Richard Stoup, Mary Abbott
Abstract: A number of new or revised services in dimensional metrology are presented.  Included are: a lower cost, high accuracy calibration for sphere diameter; reduced uncertainty in roundness calibration; a new instrument for measurement of the thermal ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823188

5. Uncertainties in Small-Angle Measurement Systems Used to Calibrate Angle Artifacts
Published: 5/1/2004
Authors: Jack A Stone Jr, M Amer, Bryon S. Faust, Jay H Zimmerman
Abstract: We have studied a number of effects that can give rise to errors in small-angle measurement systems when they are used to calibrate artifacts such as optical polygons. Of these sources of uncertainty, the most difficult to quantify are errors associa ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=822151

6. Angle Metrology Using AAMACS and Two Small-Angle Measurement Systems
Published: 11/28/2003
Authors: Jack A Stone Jr, M Amer, Bryon S. Faust, Jay H Zimmerman
Abstract: The highest accuracy method for angle measurement employed at NIST(National Institute of Standards and Technology) makes use of an automated stack of three indexing tables-- our Advanced Automated Master Angle Calibration System (AAMACS)-- in conjunc ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=822027

7. Case Against Optical Gauge Block Metrology
Published: 9/1/1998
Authors: Theodore D Doiron, Dennis S Everett, Bryon S. Faust, Eric S Stanfield, John Richard Stoup
Abstract: The current definition of length of a gage block is a very clever attempt to evade the systematic errors associated with the wringing layer thickness and optical phase corrections. In practice, there are very large systematic operator and surface eff ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820890

8. Minimizing Error Sources in Gage Block Mechanical Comparison Measurements
Published: 9/1/1998
Authors: Bryon S. Faust, John Richard Stoup, Debra K Stanfield
Abstract: Error sources in gage block mechanical comparisons can range from classical textbook examples (thermal gradients, correct temperature value, and correct master value) to a completely counter-intuitive example of diamond probe tip wear at low applied ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820895

9. Minimizing Errors in Phase Change Correction Measurements for Gage Blocks Using a Spherical Contact Techniques
Published: 9/1/1998
Authors: John Richard Stoup, Bryon S. Faust, Theodore D Doiron
Abstract: One of the most elusive measurement elements in gage block interferometry is the correction for the phase change on reflection. Techniques used to quantify this correction have improved over the years, but the measurement uncertainty has remained rel ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820914

10. Benchmarking the Length Measurement Capabilities of the National Institute of Standards and Technology
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 6036
Published: 1/1/1997
Authors: Richard M Silver, J Land, Jack A Stone Jr, Ronald G Dixson, Bryon S. Faust, James Edward Potzick, Michael T Postek, et al
Abstract: A cross-section of measurements from the Precision Engineering Division within the National Institute of Standards and Technology is benchmarked against other leading National Measurement Institutes. We present a variety of length-related calibration ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820872



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series