NIST logo

Publications Portal

You searched on:
Author: william rippey

Displaying records 21 to 30 of 41 records.
Resort by: Date / Title


21. Networking of Welding Applications: A Tutorial
Published: 1/16/2000
Authors: William G Rippey, James D Gilsinn, L Flitter
Abstract: Welding
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820653

22. A Welding Cell with Its Own Web Site
Published: 1/1/2000
Authors: Terry Quinn, James D Gilsinn, William G Rippey
Abstract: Welding
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820657

23. Networking of Welding Applications: A Tutorial - Knowing the Basics Behind Network Technology Will Help Users of Welding Equipment Identify Where Networks May Be Most Beneficial
Published: 1/1/2000
Authors: William G Rippey, James D Gilsinn, L Flitter
Abstract: This article describes the basics of network technology and how networks are being applied to commercial welding applications. The goal is to help non-computer-expert weld technology users to decide where products that use networks may be beneficia ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823363

24. A Welding Cell That Supports Remote Collaboration
Published: 9/30/1999
Authors: James D Gilsinn, William G Rippey, Joseph A Falco, Timothy P Quinn, Robert Russell, Keith A Stouffer
Abstract: Discrete part manufacturers using robotic arc welding cells often have several more geographically distributed plants than welding experts. This ratio often leads to costly downtimes due to both logistic and communication deficiencies between weld ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820646

25. The NIST DMIS Interpreter: Version 2
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 6252
Published: 10/1/1998
Authors: Thomas Rollin Kramer, Frederick M Proctor, William G Rippey, Harry A. Scott
Abstract: The National Institute of Standards and Technology (NIST) DMIS interpreter is a software system that reads control code programs in the DMIS language (described below in Section 1.2), produces calls to a set of canonical commands for coordinate mea ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820628

26. The NIST DMIS Interpreter: Version 2
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 6252
Published: 10/1/1998
Authors: Thomas Rollin Kramer, Frederick M Proctor, William G Rippey, Harry A. Scott
Abstract: This report describes an interpreter which reads a file of numerical control code for a coordinate measuring machine (CMM), produces calls to a set of canonical CMM functions, and writes inspection report files. The interpreter is a software system ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=823357

27. NGIS SIM Specification
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 6116
Published: 1/1/1998
Authors: William G Rippey, John L Michaloski, Martin Herman, Sandor S. Szabo, W Dewys, N Frampton
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820610

28. A Unique Sensor Fusion System for Coordinate Measuring Machine Tasks
Published: 10/1/1997
Authors: M Nashman, Billibon H Yoshimi, Tsai Hong Hong, William G Rippey, Martin Herman
Abstract: This paper describes a real-time hierarchical system that combines (fuses) data from vision and touch sensors to simplify and improve the operation of a coordinate measuring machine (CMM) used for dimensional inspection tasks. Our emphasis is on se ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820613

29. Integrated Vision and Touch Sensing for CMMs
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 6082
Published: 10/1/1997
Authors: Billibon H Yoshimi, Tsai Hong Hong, Martin Herman, M Nashman, William G Rippey
Abstract: This paper describes a calibrated and an uncalibrated method for integrating a vision system with touch sensors and a Coordinate Measuring Machine (CMM). Traditionally, vision systems are used to measure machined parts and to localize manufacturing ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820603

30. The NIST Automated Arch Welding Testbed
Published: 7/11/1997
Authors: William G Rippey, Joseph A Falco
Abstract: Welding, Robotics & Intelligent Systems
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=820598



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series