Comparitive Analysis of an Automative Air Conditioning Systems Operating With CO2 and R134a.

Published

January 1, 2002

Author(s)

Piotr A. Domanski, J S. Brown, S F. Yana-Motta

Abstract

This paper evaluates performance merits of CO2 and R134a automotive air conditioning systems using semi-theoretical cycle models. The R134a system had a current-production configuration, which consisted of a compressor, condenser, expansion device, and evaporator. The CO2 system was additionally equipped with a liquid-line/suction-line heat exchanger. Using these two systems, an effort was made to derive an equitable comparison of performance; the components in both systems were equivalent and differences in thermodynamic and transport properties were accounted for in the simulations. The analysis showed R134a having a better COP than CO2 with the COP disparity being dependent on compressor speed (system capacity) and ambient temperature. For a compressor speed of 1000 RPM, the COP of CO2 was lower by 21% at 32.2C and by 34% at 48.9 deg C. At higher speeds and ambient temperatures, the COP disparity was even greater. The entropy generation calculations indicated that the large entropy generation in the gas cooler was the primary cause for the lower performance of CO2.

Citation

International Journal of Refirgeration

Publisher Info

, -1

Pub Type

Book Chapters

Download Paper

Local Download

Keywords

automobiles, air conditioning, carbon dioxide

Citation

Domanski, P. , Brown, J. and Yana-Motta, S. (2002), Comparitive Analysis of an Automative Air Conditioning Systems Operating With CO2 and R134a., International Journal of Refirgeration, , -1, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=916977 (Accessed May 7, 2024)