Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Convective Boiling and Condensation Heat Transfer With a Twisted-Tape Insert for R12, R22, R152a, R134a, R290, R32/R134a, R32/R152a, R290/R134a, R134a/R600a

Published

Author(s)

Mark A. Kedzierski, Min S. Kim

Abstract

Measured, local-average Nusselt numbers (Nu) for in-tube, convective boiling and condensation with a twisted-tape insert are presented for: R12, R22, R152a, R134a, R290, R32/R134a, R32/R152a, R290/R134a, and R134a/R600a. The heat transfer data were obtained from a fluid heated/fluid cooled, 9.7 m long condenser and evaporator of a breadboard refrigeration cycle. Convective-boiling, heat-transfer data were taken for transition and turbulent all-liquid Reynolds numbers. Convective-condensation, heat-transfer data were taken for laminar and turbulent all-liquid Reynolds numbers. The measured convective boiling and condensation Nusselt numbers for the single component and the azeotropic mixtures were each correlated to a single expression consisting of a product of dimensionless properties. The single component convective-boiling correlation was modified to predict the zeotropic mixture data. The predictions obtained from the modified flow-boiling correlations found in the literature were significantly different from the present Nusselt number measurements. Presumably, the correlations from the literature could account for neither the partial dryout induced by the tape nor the bubbly-mist flow introduced by an expansion valve.
Citation
Thermal Science & Engineering
Volume
6
Issue
No. 1

Keywords

azeotropes, flow boiling, in-tube condensation, twisted tapes, enhanced heat transfer, refrigernant mixtures, refrigerants

Citation

Kedzierski, M. and Kim, M. (1998), Convective Boiling and Condensation Heat Transfer With a Twisted-Tape Insert for R12, R22, R152a, R134a, R290, R32/R134a, R32/R152a, R290/R134a, R134a/R600a, Thermal Science & Engineering, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=910464 (Accessed April 24, 2024)
Created January 1, 1998, Updated February 19, 2017