Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

A nonlinear model for gusset plate connections

Published

Author(s)

Dat Duthinh, Chiara Crosti

Abstract

The investigation of the 2007 collapse of the I-35 W Bridge in Minnesota, United States, used very detailed nonlinear finite-element (FE) analysis, which is too difficult for routine design. On the other hand, simple guidelines amenable to hand calculations were provided by the Federal Highway Administration for the load rating of gusset plates, but they are unable to account for the actual behavior of the connections in the global bridge analysis. An intermediate approach is presented, whereby a simplified connection in the form of linear or nonlinear spring models is proposed to improve on current design analysis, which typically is linear and assumes rigid connections. The model is derived from the FE analysis of a typical joint and can be placed at many locations, with modifications required by geometry. The model is verified against a two-dimensional global FE analysis of a steel truss bridge that uses detailed connection models.
Citation
Journal of Structural Engineering-ASCE

Keywords

Bridges, connections, finite-element analysis, gusset plate, linear springs, steel truss.

Citation

Duthinh, D. and Crosti, C. (2014), A nonlinear model for gusset plate connections, Journal of Structural Engineering-ASCE (Accessed March 18, 2024)
Created March 14, 2014, Updated August 18, 2020