Take a sneak peek at the new NIST.gov and let us know what you think!
(Please note: some content may not be complete on the beta site.).
NIST Authors in Bold
|Author(s):||Douglas A. Olson; Patrick J. Abbott; Karl Jousten; Fiona J. Redgrave; Pardeep Mohan; S S. Hong;|
|Title:||Final report of key comparison CCM.P-K3 absolute pressure measurements in gas from 3E-6 Pa to 9E-4 Pa|
|Published:||March 31, 2010|
|Abstract:||This report describes a CCM key comparison of absolute pressure at five National Metrology Institutes (NMIs) that was carried out from August 1998 to May 2002. The goal of the key comparison was to determine the degree of equivalence at pressures in the range of 3E-6 Pa to 9E-4 Pa. The primary standards were dynamic expansion standards at four of the NMIs and a series expansion standard at the fifth NMI. The transfer standard package consisted of two spinning rotor gauges (SRGs) and three Bayard-Alpert ionization gauges. Due to equipment malfunctions, only one of the ionization gauges was calibrated by all of the participants. The SRG measurements were used to compare NMIs at 9E-4 Pa and to normalize the ionization gauge results at that same pressure. The ionization gauge measurements were used to compare NMIs at the lower pressures. The degrees of equivalence of the NMI standards were determined in two ways: deviations from the key comparison reference value (KCRV), and pairwise differences between those deviations. Four of the NMIs show equivalence to the KCRV and each other over the full range of pressures relative to the expanded uncertainties of the comparisons at the k=2 level. One NMI was equivalent to the KCRV at 3E-6 Pa only, and showed lack of equivalence to one or more NMIs in the range of 9E-6 Pa to 9E-4 Pa.|
|Keywords:||degrees of equivalence, dynamic expansion, high vacuum, ionization gauge, key comparison, key comparison reference value, pressure, series expansion, spinning rotor gauge, vacuum|
|Research Areas:||Calibrations (Thermodynamic), Pressure & Vacuum, Pressure & Vacuum, Statistics, SI (Mass)|
|PDF version:||Click here to retrieve PDF version of paper (357KB)|