Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Amorphous Calcium Phosphate Based Composites: Effect of Surfactants and Poly(Ethylene Oxide) on Filler and Composite Properties

Published

Author(s)

Joseph M. Antonucci, Da-Wei Liu, Drago Skrtic

Abstract

The uncontrolled aggregation of amorphous calcium phosphate (ACP) particulate fillers and their uneven distribution within polymer matrices can have adverse effects on the properties of ACP composites. In this paper we assessed the influence of non-ionic and anionic surfactants and poly(ethylene glycol) (PEO) oligomers introduced during the preparation of ACP on the particle size distribution and compositional properties of ACP. In addition, the mechanical strength of polymeric composites utilizing such fillers with a photo-activated binary methacrylate resin was evaluated. Zirconia-hybridized ACP (Zr-ACP) filler and its corresponding composite served as controls for this study. Surfactant- and PEO-ACPs had an average water content of 16.8 % by mass. Introduction of the anionic surfactant reduced the median particle diameter about 45 % (4.1 m vs. 7.4 m for the Zr-ACP control).In the presence of PEO, however, the dm increased to 14.1 m. There was no improvement in the biaxial flexure strength (BFS) in any of the dry composite specimens prepared with the surfactant- and/or PEO-ACPs compared to those formulated with Zr-ACP. The BFS of wet composite specimens decreased by 50 % or more after a month-long exposure to saline solutions. Other types of surfactants and/or polymers as well as alternative surface modification protocols need to be explored for their potential to provide better dispersion of ACP into the matrix resin and better mechanical performance ACP composites.
Citation
Journal of Dispersion Science and Technology
Volume
28
Issue
5

Keywords

amorphous calcium phosphate, composite, mechanical strength, particle size distribution, poly(ethylene glycol), surfactants

Citation

Antonucci, J. , Liu, D. and Skrtic, D. (2008), Amorphous Calcium Phosphate Based Composites: Effect of Surfactants and Poly(Ethylene Oxide) on Filler and Composite Properties, Journal of Dispersion Science and Technology, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=852635 (Accessed March 29, 2024)
Created August 19, 2008, Updated February 19, 2017