Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Performing Measurements of Surface Structures With the Calibrated Atomic Force Microscope

Published

Author(s)

R Koning, Ronald G. Dixson, Joseph Fu, V W. Tsai, Theodore V. Vorburger

Abstract

The use of the atomic force microscope (AFM) to characterize surface structures for industrial applications is rapidly increasing.  To compare the results obtained by different instruments and to achieve high accuracy, the scales of an AFM must be calibrated.  Perhaps the most convenient and most appropriate method is the use of a calibration standard.  To avoid any possible contributions to the calibration uncertainty due to different interactions used by different measurement methods the AFM standards should be calibrated by using an AFM.  Therefore we have build a calibrated AFM (C-AFM).  It has metrology traceable to the wavelength of light for all three axes.  To demonstrate the performance of the C-AFM, step height (from 18 nm to 180 nm) and pitch measurements (from 200 nm to 20 um) on commercially available calibration artifacts were taken.  After optimizing the measurement procedure, the results of the step height measurement showed an excellent repeatability and agreed well with the values obtained by stylus measurements.  The C-AFM measurements of pitch on several samples have been compared with a metrology optical microscope system (Line scale interferometer) at NIST, and the observed agreement was well within the combined standard uncertainties.
Citation
Performing measurements of surface structures with the Calibrated Atomic Force Microscope

Keywords

metrology, pitch, scanning probe microscope, step height

Citation

Koning, R. , Dixson, R. , Fu, J. , Tsai, V. and Vorburger, T. (1998), Performing Measurements of Surface Structures With the Calibrated Atomic Force Microscope, Performing measurements of surface structures with the Calibrated Atomic Force Microscope, [online], http://www.nist.gov/sigmaxi/Posters98/abs/Koning.html (Accessed March 29, 2024)
Created December 31, 1997, Updated October 12, 2021