Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

A Strategy for Faster Blind Reconstruction of Tip Geometry for Scanned Probe Microscopy

Published

Author(s)

John S. Villarrubia

Abstract

In scanned probe microscopy, it is necessary to know the tip's geometry in order to correct image distortions due to its finite size. Heretofore, methods have focused upon determining the tip geometry by erosion of a tip characterizer of known geometry from its image. Three dimensional knowledge of the characterizer with uncertainties small at the size scale of the tip is a prerequisite for this method. The necessary accuracy is often difficult to meet in practice, particularly for characterizers with relief on the order of a micrometer such as are required to measure tips for use with microlithographic specimens. A recently proposed alternative, blind reconstruction, permits estimation of the tip shape even with an unknown tip characterizer. The method relies upon the fact that tips which are too blunt are inconsistent with observed image features. For each pixel on a measured image, one may determine a corresponding outer bound on the tip shape. The actual tip must be consistent with the bounds determined for all image points. For well-chosen characterizers, blind reconstruction provides a good estimate of the tip geometry. Although this method eliminates the need for separate calibration of the tip characterizer, it is more computationally intensive than reconstruction by erosion. Blind reconstruction is reviewed, and a strategy for decreasing the computation time is discussed. A factor of three or more may be saved for typical images in an exact calculation, while an additional factor of ten or more may be saved by resorting to approximate methods.
Conference Dates
February 23-25, 1998
Conference Location
Santa Clara, CA
Conference Title
Metrology, Inspection, and Process Control for Microlithography

Keywords

atomic force microscopy, blind reconstruction, computation time, scanner probe microscopy, scanning tunneling microscopy, tip estimation

Citation

Villarrubia, J. (1999), A Strategy for Faster Blind Reconstruction of Tip Geometry for Scanned Probe Microscopy, Metrology, Inspection, and Process Control for Microlithography, Santa Clara, CA (Accessed March 19, 2024)
Created March 1, 1999, Updated February 19, 2017