NIST logo

Publications Portal

You searched on: Topic Area: Materials Science Sorted by: title

Displaying records 371 to 380 of 405 records.
Resort by: Date / Title


371. The Influence Of Hydrogen On The Elastic Modulus And Anelastic Response Of Cold Worked Pure Iron
Topic: Materials Science
Published: 7/1/2009
Authors: Richard E Ricker, David J Pitchure
Abstract: Understanding the influence of hydrogen on elastic deformation and anelastic response should contribute to our understanding of the influence of hydrogen on deformation and fracture. To accomplish this objective, samples of pure iron were cold-worked ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901982

372. The International Institute of Welding: Report on 1998 Actions
Topic: Materials Science
Published: 5/3/1999
Author: Thomas Allen Siewert
Abstract: Commission V covers issues of weld inspection and quality control for the International Institute of Welding (IIW). This report summarizes the information presented at the 1998 Annual Assembly: descriptions of both research and draft ISO standards b ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=851212

373. The Recovery of Elastic Properties at 35 C in Trip 700 Steel Following Deformation
Topic: Materials Science
Published: 6/1/2007
Authors: David J Pitchure, Richard E Ricker
Abstract: The influence of plastic deformation on the elastic properties that determine the magnitude of springback following forming was investigated using dynamic modulus analysis. For this study, the elastic modulus of TRIP 700 steel was measured continuou ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=853488

374. The effect of thermal oxidation on laser-induced photoelectron emission during tensile deformation of polycrystalline aluminum
Topic: Materials Science
Published: 4/1/2010
Authors: M Cai, S C Langford, Richard E Ricker, Lyle E Levine, J T Dickinson
Abstract: Many metals emit electrons when exposed to UV radiation from excimer lasers (photon energies 4 eV to 8 eV). Deformation can significantly affect the intensity of these emissions. In the case of reactive metals, these emissions are also altered by t ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=904291

375. The evaluation of photo/e-beam complementary grayscale lithography for high topography 3D structure
Topic: Materials Science
Published: 3/29/2013
Authors: Liya Yu, Richard J Kasica, Robert Dennis Newby, Lei NMN Chen, Vincent K Luciani
Abstract: This article demonstrates and evaluates photo/e-beam grayscale complementary lithography processes for the fabrication of large area, high topography grayscale structure. The combination of these two techniques capitalizes on the capability of photol ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913677

376. The molecular basis of mesophase ordering in a thiophene-based copolymer
Topic: Materials Science
Published: 2/18/2009
Authors: Dean M DeLongchamp, Regis J Kline, Youngsuk Jung, Eric K Lin, Daniel A Fischer, David J Gundlach, Andrew Moad, Lee J Richter, Michael F. Toney, Martin Heeney, Iain McCulloch
Abstract: The carrier mobility of poly(2,5-bis(3-alkylthiophen-2-yl) thieno[3,2-b]thiophene) semiconductors can be substantially enhanced after heating through a thermotropic mesophase transition, which causes a significant improvement in thin film structural ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=852781

377. Thermoreversible Gels from Mixtures of a High-melting Ionic Liquid and a Polar Polymer for Self-Healing Materials
Topic: Materials Science
Published: 3/27/2011
Authors: Joonsung (Joonsung) Yoon, Christopher M Stafford
Abstract: We investigate a new kind of PVOH physical gel in which the volatile water is replaced with a non-volatile ionic liquid (IL). High melting IL containing Br- anion was chosen so that the hydrogen-bond accepting Br- can enhance miscibility with PVOH wh ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907159

378. Thickness effect on the viscoelastic properties of polystyrene thin films as measured by thermal wrinkling
Topic: Materials Science
Published: 12/29/2010
Authors: Edwin P Chan, Santanu S. Kundu, Qinhuang Lin, Christopher M Stafford
Abstract: The viscoelastic properties of polymer thin films can have a significant impact on the performance in many small-scale devices. In this work, we use thermal wrinkling, which is a phenomenon based on a thermally-initiated instability, to measure visco ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906587

379. Three dimensional optical manipulation and structural imaging of soft materials by use of laser tweezers and multimodal nonlinear microscopy
Topic: Materials Science
Published: 12/15/2010
Authors: Rahul P. Trivedi, Kristine A Bertness, Ivan I. Smalyukh
Abstract: We develop an integrated system of holographic optical trapping and multimodal nonlinear microscopy and perform simultaneous three-dimensional optical manipulation and non-invasive structural imaging of composite soft-matter systems. We combine d ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907356

380. Time-resolved photoluminescence of lithographically defined quantum dots fabricated by electron beam lithography and wet chemical etching
Topic: Materials Science
Published: 6/15/2011
Authors: Varun Boehm Verma, Martin J Stevens, Kevin Lawrence Silverman, Neville Dias, Akash Garg, James J. Coleman, Richard P Mirin
Abstract: We measure the time-resolved photoluminescence characteristics of a novel type of lithographically patterned quantum dot fabricated by electron beam lithography, wet chemical etching, and overgrowth of the barrier layers by metalorganic chemical ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907840



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series