NIST logo

Publications Portal

You searched on:
Topic Area: Manufacturing
Sorted by: date

Your search results exceeded 1,000 records. Please refine your search and try again.
Displaying records 11 to 20 of 1000 records.
Resort by: Date / Title


11. Effects of Temperature on Surface Accumulation and Release of Silica Nanoparticles in an Epoxy Nanocoating Exposed to UV Radiation
Topic: Manufacturing
Published: 6/16/2014
Authors: Chun-Chieh Tien, Ching-Hsuan Chang, Bernard Hao-Chih Liu, Deborah L Stanley, Savelas A Rabb, Lee Lijian Yu, Tinh Nguyen, Li Piin Sung
Abstract: Polymer nanocoatings are increasingly used outdoors and in harsh environments. However, because most common polymers degraded by the weathering elements, nanoparticles in polymer nanocoatings may be released into the environments. Such nanoparticle r ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915955

12. Defect and Microstructural Evolution in Thermally Cycled Cu Through-Silicon Vias
Topic: Manufacturing
Published: 6/14/2014
Authors: Chukwudi Azubuike Okoro, James Marro, Yaw S Obeng, Kathleen Richardson
Abstract: In this study, the effect of thermal cycling on defect generation, microstructure, and the RF signal integrity of blind Cu through-silicon via (TSV) were investigated. Three different thermal cycling profiles were used; each differentiated by their ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915535

13. Uncertainty in Measurement of the Maximum Cutting Tool Temperature by Infrared Thermography
Topic: Manufacturing
Published: 6/13/2014
Authors: Brandon M Lane, Eric Paul Whitenton, Viswanathan Madhavan, M Alkan Donmez
Abstract: This paper presents an analysis of the uncertainty in measurement of the peak temperature on the side face of a cutting tool by infrared thermography. An analytical method uses the temperature measurement equation to study the uncertainty arising f ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915534

14. BPMN Profile for Operational Requirements
Topic: Manufacturing
Published: 6/2/2014
Authors: Conrad E Bock, Raphael R. Barbau, Anantha Narayanan Narayanan
Abstract: An important aspect of systems and products is how they interact with their environment, including how they are operated. Behaviors external to systems usually involve people not trained in the details of how systems are designed and built, but who ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914621

15. Infrared Thermography of the Chip-Tool Interface through Transparent Cutting Tools
Topic: Manufacturing
Published: 6/2/2014
Authors: Thejas T. Menon, Viswanathan Madhavan
Abstract: In-situ observation of the chip-tool interface has been carried out while machining Ti-6Al-4V. A low-noise camera sensitive to visible and near infrared (IR) radiation has been used to record the radiation emitted by the interface, and relatively lon ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915381

16. X-Ray Micro-Beam Diffraction Measurement of the Effect of Thermal Cycling on Stress in Cu TSV: A Comparative Study
Topic: Manufacturing
Published: 5/26/2014
Authors: Chukwudi Azubuike Okoro, Lyle E Levine, Yaw S Obeng, Klaus Hummler, Ruqing Xu
Abstract: Microelectronic devices are subjected to constantly varying temperature conditions during their operational lifetime, which can lead to their failure. In this study, we examined the impact of thermal cycling on the evolution of stresses in Cu TSVs us ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915644

17. A portrait of an ISO STEP tolerancing standard as an enabler of smart manufacturing systems
Topic: Manufacturing
Published: 5/21/2014
Authors: Allison Barnard Feeney, Simon Paul Frechette, Vijay Srinivasan
Abstract: The International Organization for Standardization (ISO) has just completed a major effort on a new standard ISO 10303-242 titled ,Managed Model Based 3D Engineering.‰ It belongs to a family of standards called STEP (STandard for the Exchange of Prod ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=915430

18. 2D and 3D Topography Comparisons of Toolmarks Produced from Consecutively Manufactured Chisels and Punches.
Topic: Manufacturing
Published: 5/20/2014
Authors: Xiaoyu A Zheng, Johannes A Soons, Robert Meryln Thompson, John Villanova, Taher Kakal
Abstract: A 2009 report by the National Academies [1] recommended strengthening the scientific basis of procedures and criteria employed by the forensic science specialty of toolmark identification. The current method of comparison and determination of ide ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914887

19. Geometric Interoperability via Queries
Topic: Manufacturing
Published: 5/19/2014
Author: Vijay Srinivasan
Abstract: The problem of geometric (model and system) interoperability is a non-trivial generalization of the classical problem of part interchangeability in mechanical assemblies. Interoperability subsumes the challenging problems of geometric model quality, ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914283

20. Report from a 2013 ASME Panel on Geometric Interoperability for Advanced Manufacturing
Topic: Manufacturing
Published: 5/19/2014
Authors: Vijay Srinivasan, Vadim Shapiro
Abstract: During the Summer of 2013 in a conference organized by the American Society of Mechanical Engineers (ASME) at Madison, Wisconsin, a panel of academic, industrial, and government researchers engaged in a spirited discussion on the issue of geometric i ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=914694



Search NIST-wide:


(Search abstract and keywords)


Last Name:
First Name:







Special Publications:

Looking for a NIST Special Publication (NIST SP Series)? Place the series number and dash in the report number field (Example: 800-) and begin your search.

  • SP 250-XX: Calibration Services
  • SP 260-XX: Standard Reference Materials
  • SP 300-XX: Precision Measurement and Calibration
  • SP 400-XX: Semiconductor Measurement Technology
  • SP 480-XX: Law Enforcement Technology
  • SP 500-XX: Computer Systems Technology
  • SP 700-XX: Industrial Measurement Series
  • SP 800-XX: Computer Security Series
  • SP 823-XX: Integrated Services Digital Network Series